Updated script files.

scripts/lib/systemd/system/relinker.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=relinker service
+After=multi-user.target
+
+[Service]
+Type=idle
+
+ExecStart=/bin/bash /opt/script/relink-repeater.sh >> /var/log/script/checkBMAPI.log 2>&1
+
+
+[Install]
+WantedBy=multi-user.target

scripts/lib/systemd/system/relinkerhot.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=relinkerhot service
+After=multi-user.target
+
+[Service]
+Type=idle
+
+ExecStart=/bin/bash /opt/script/relink-hotspot.sh >> /var/log/script/checkBMAPI.log 2>&1
+
+
+[Install]
+WantedBy=multi-user.target 

scripts/opt/script/README

@@ -1,8 +1,14 @@
+DMR SUDO Reflector - TG  
 
 
 
 
 
+This is the first release version of the relinker scripts 3.1 
+
+
+
+
 
 
 These scripts are supplied as is and work in conjuction with DMRGateway Mid April 2020 Onwards .....If you don't understand the notes ask someone who does please     
@@ -40,33 +46,62 @@ Enabled=1
 Port=3769
 
 
-copy the package DMRGateway-TGDynRewrite-relinker-2.0.tgz to the folder /   unpack with tar -xvf packagename  which should create folders /opt/script/script runtimes and /var/log/script/various working files and log       
 
-configure the config file /opt/script/script.conf   call repeater=235??? ID   with your default slots and dont forget to set these static via BM selfcare also min relink timer minrelinktimer in seconds
 
-this is the time before reconnection on a slot after someone finishes and either the slot is unlinked by the user or the dynamic times out 
+1.  Copy the package DMRGateway-TGDynRewrite-relinker-3.1.tgz to the folder/boot  and also the install-relinker.sh script supplied (you can do this with a card reader from windows if you like) 
+
+
+2.  run /boot#./install-relinker     which should create folders /opt/script/script  and /var/log/script/various working files and logfile. it also sets up services in systemd 
+
+ready to run the script required
+
+       
+
+3. Edit the config file /opt/script/script.conf repeater=235??? ID  call callsign your defaults for slot linking   
+
+also min relink timer minrelinktimer in seconds this is the time before reconnection on a slot after someone finishes RF and either the slot is unlinked by the user 
+
+or the dynamic times out i.e BM timer 
+
+it waits a further minlinktimer seconds before relinking 
+
+slowdown=10   This is higher for faster rasp pi 10 for  pi 3B +  or 1  for original Pi B   
+
+checkslot1=check_status_slot1
+checkslot2=check_status_slot2
+slot1notlinked=check_if_nothing_linked_slot1  
+slot2notlinked=check_if_nothing_linked_slot2
+
+Above checks all slots default for repeater with prefered config SUDO Reflectors both slots ............if in doubt include all these lines !!!!
+
+ 
+checkslot1=
+checkslot2=check_status_slot2
+slot1notlinked=   
+slot2notlinked=check_if_nothing_linked_slot2
+
+Above checks only slot 2 typically a hotspot........ or a repeater that only has SUDO Reflectors enabled in DMRGateway on one of the slots 
+ 
+
+............if in doubt include all these lines in first example!!!!
 
 
 
 
+4. Don't forget to set these static via Brandmeister selfcare
  
-Add the following line to crontab on the rasp pi you dont need to do anything else just save crontab and exit
+
+
+5. Add the following line to crontab on the rasp pi you dont need to do anything else just save crontab and exit 
 
 17 *	* * *	root    echo -n "" > /var/log/script/checkBMAPI.log
 
 
-Add one of the following to etc/rc.local right at end just before exit 0
-
-
-/opt/script/./run-relinker.sh
-
-or
- 
-/opt/script/./run-relinker-hotspot.sh
 
 
 
-pi-star additional step
+
+6. Pi-star additional step
 
 
 Also in same file etc/rc.local 
@@ -88,9 +123,57 @@ if [ ! -d /var/log/script ]; then
 fi
  
 
+7. start one of the services with following command
+
+
+choose either Repeater 
+
+systemctl start relinker.service
+
+
+
+or Hotspot ?
+
+systemctl start relinkerhot.service
+
+
+systemctl status relinker.service     
+
+or 
+
+systemctl status relinkerhot.service
+
+
+will show if its running if it is running ?  
+
+
+you can tail the log file at the command prompt 
+
+
+tail -f /var/log/script/checkBMAPI.log
+
+
+once it is confirmed running and working 
+
+
+enable the service you chose to enable automatically at boot example 
+
+systemctl enable relinker.service 
+
+for repeater 
+
+or
+
+systemctl enable relinkerhot.service
+
+for hotspot
+
+
 reboot 
 
 
+once you have rebooted check all is auto starting 
+
 
 you can tail the log file at the command prompt 
 

scripts/opt/script/install-relinker.sh

@@ -1,11 +1,17 @@
 #!/bin/bash
 
-cp DMRG*.tgz /
+
+
+
 cd /
+rm -rf DMRGa*
+cd /opt 
+rm -rf script
+cd /var/log
+rm -rf script
 
-tar -xvf DMRG*
+cd /boot
-
+cp DMRGateway*.tgz /
-
+cd /
-
+tar -xvf DMRGateway*.tgz
-
+systemctl daemon-reload
-

scripts/opt/script/relink-hotspot.sh

@@ -24,7 +24,7 @@ check_BM_API(){
 
 	#sed -n -e 's/^.*slot":2,"timeout"://p' /var/log/script/test3.txt > /var/log/script/test4.txt
 
-	sed -n -e 's/^.*slot":0,"timeout"://p' /Var/log/script/test3.txt > /var/log/script/test4.txt
+	sed -n -e 's/^.*slot":0,"timeout"://p' /var/log/script/test3.txt > /var/log/script/test4.txt
 
 	
 	sed 's/},{"repeaterid.*//' /var/log/script/test4.txt > /var/log/script/slot2.txt
@@ -124,11 +124,14 @@ check_if_nothing_linked_slot2(){
 
 check_BM_API
 echo
-#check_status_slot1
+$checkslot1
-check_status_slot2
+$checkslot2
-#check_if_nothing_linked_slot1
+$slot1notlinked
-check_if_nothing_linked_slot2
+$slot2notlinked
 echo
+sleep $slowdown 
+/bin/bash /opt/script/relink-hotspot.sh >> /var/log/script/checkBMAPI.log 2>&1
+
 
 
 

scripts/opt/script/relink-repeater.sh

@@ -124,12 +124,11 @@ check_if_nothing_linked_slot2(){
 
 check_BM_API
 echo
-check_status_slot1
+$checkslot1
-check_status_slot2
+$checkslot2
-check_if_nothing_linked_slot1
+$slot1notlinked
-check_if_nothing_linked_slot2
+$slot2notlinked
 echo
-echo
+sleep $slowdown 
-sleep 5
+/bin/bash /opt/script/relink-repeater.sh >> /var/log/script/checkBMAPI.log 2>&1
-#/opt/script/./check.sh >> /var/log/script/checkBMAPI.log
  

scripts/opt/script/script.conf

@@ -1,7 +1,20 @@
 #!/usr/bin/bash
-repeater=235192
+repeater=234587501
-call=GB3IN
+call=M0VUB
-defaultslot1=23590
+defaultslot1=0
-defaultslot2=91
+defaultslot2=2350
 minrelinktimerslot1=30
 minrelinktimerslot2=30
+slowdown=10
+checkslot1=
+checkslot2=check_status_slot2
+slot1notlinked=   
+slot2notlinked=check_if_nothing_linked_slot2
+
+#configuration above enabled to watch slot 2 only on a hotspot 
+
+# add the lines as required you may only have 1 slot monitored on a repeater if thats
+
+# all using SUDO Reflectors Cant imagine why 
+
+ 

scripts/var/log/script/test1.txt

@@ -0,0 +1 @@
+{"reflector":{"reflector":0,"interval":0,"active":4000},"blockedGroups":[],"staticSubscriptions":[{"talkgroup":91,"networkid":2341,"repeaterid":235192,"slot":2,"type":"tarantool"},{"talkgroup":23590,"networkid":2341,"repeaterid":235192,"slot":1,"type":"tarantool"}],"dynamicSubscriptions":[],"timedSubscriptions":[],"clusters":[]}