From d7b77cb32e09d110dda4b08099e293f4508812f6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=94=90=E6=B0=B8=E5=B7=9D?= Date: Thu, 18 Jun 2026 18:03:04 +0000 Subject: [PATCH] update dev-setup.sh. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: 唐永川 --- dev-setup.sh | 2452 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 2451 insertions(+), 1 deletion(-) diff --git a/dev-setup.sh b/dev-setup.sh index 8a1a88d..7a84a3f 100755 --- a/dev-setup.sh +++ b/dev-setup.sh @@ -97,4 +97,2454 @@ log_warning() { log_error() { printf "%b\n" "${RED}[ERROR]${NC} $1" -} \ No newline at end of file +} + +log_step() { + printf "%b\n" "${CYAN}[STEP]${NC} $1" +} + +trim_trailing_slashes() { + local value=$1 + while [ "${value%/}" != "$value" ]; do + value=${value%/} + done + echo "$value" +} + +validate_public_url() { + local name=$1 + local value=$2 + + if [ -z "$value" ]; then + return 0 + fi + + case "$value" in + http://*|https://*) + return 0 + ;; + *) + log_error "$name 必须以 http:// 或 https:// 开头: $value" + exit 1 + ;; + esac +} + +set_url_defaults_from_site_url() { + local normalized_site_url + normalized_site_url=$(trim_trailing_slashes "$SITE_URL") + + ADMIN_URL="$normalized_site_url" + QIANKUN_ENTRY_URL="$normalized_site_url/newpc/" + derive_api_base_from_admin_url +} + +derive_api_base_from_admin_url() { + local normalized_api_url + normalized_api_url="$(trim_trailing_slashes "$ADMIN_URL")/api" + + API_BASE_URL="$normalized_api_url/" + MOBILE_API_URL="$normalized_api_url/h5app/wxapp" + PC_API_URL="$normalized_api_url/h5app" +} + +configure_public_urls() { + if [ -z "$SITE_URL" ] && [ -z "$ADMIN_URL_OVERRIDE" ] && [ -z "$H5_URL_OVERRIDE" ] && [ -z "$PC_URL_OVERRIDE" ]; then + echo "" + log_info "外部访问地址配置：" + log_info " 每项直接回车使用默认本地地址" + log_info " 生产环境可分别输入管理后台、PC、H5 的完整访问地址" + read -r -p "请输入管理后台/API 地址 (默认: $ADMIN_URL): " ADMIN_URL_OVERRIDE < /dev/tty + read -r -p "请输入 PC 前端地址 (默认: $PC_URL): " PC_URL_OVERRIDE < /dev/tty + read -r -p "请输入 H5 前端地址 (默认: $H5_URL): " H5_URL_OVERRIDE < /dev/tty + fi + + SITE_URL=$(trim_trailing_slashes "$SITE_URL") + ADMIN_URL_OVERRIDE=$(trim_trailing_slashes "$ADMIN_URL_OVERRIDE") + H5_URL_OVERRIDE=$(trim_trailing_slashes "$H5_URL_OVERRIDE") + PC_URL_OVERRIDE=$(trim_trailing_slashes "$PC_URL_OVERRIDE") + + validate_public_url "--site-url" "$SITE_URL" + validate_public_url "--admin-url" "$ADMIN_URL_OVERRIDE" + validate_public_url "--h5-url" "$H5_URL_OVERRIDE" + validate_public_url "--pc-url" "$PC_URL_OVERRIDE" + + if [ -n "$SITE_URL" ]; then + set_url_defaults_from_site_url + fi + + if [ -n "$ADMIN_URL_OVERRIDE" ]; then + ADMIN_URL="$ADMIN_URL_OVERRIDE" + QIANKUN_ENTRY_URL="$ADMIN_URL/newpc/" + fi + + if [ -n "$H5_URL_OVERRIDE" ]; then + H5_URL="$H5_URL_OVERRIDE" + fi + + if [ -n "$PC_URL_OVERRIDE" ]; then + PC_URL="$PC_URL_OVERRIDE" + fi + + derive_api_base_from_admin_url + + log_info "访问地址配置完成：" + log_info " 管理后台: $ADMIN_URL" + log_info " API 接口: $API_BASE_URL" + log_info " H5前端: $H5_URL" + log_info " PC前端: $PC_URL" +} + +# =========================================== +# 进度条和动画函数 +# =========================================== + +# Spinner 动画（用于不确定时长的操作） +spinner() { + local pid=$1 + local message=${2:-"处理中"} + local spinstr='|/-\' + local delay=0.1 + + while [ "$(ps a | awk '{print $1}' | grep $pid)" ]; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} $message ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep $delay + done + printf "\r${CYAN}[INFO]${NC} $message 完成\n" +} + +# 简单的进度条（用于确定时长的操作） +progress_bar() { + local current=$1 + local total=$2 + local width=50 + local percentage=$((current * 100 / total)) + local completed=$((current * width / total)) + local remaining=$((width - completed)) + + printf "\r${CYAN}[INFO]${NC} 进度: [" + printf "%${completed}s" | tr ' ' '=' + printf "%${remaining}s" | tr ' ' '-' + printf "] %d%% (%d/%d)" $percentage $current $total +} + +# 带消息的进度条 +progress_bar_with_message() { + local current=$1 + local total=$2 + local message=$3 + local width=40 + local percentage=$((current * 100 / total)) + local completed=$((current * width / total)) + local remaining=$((width - completed)) + + printf "\r${CYAN}[INFO]${NC} $message [" + printf "%${completed}s" | tr ' ' '=' + printf "%${remaining}s" | tr ' ' '-' + printf "] %d%%" $percentage +} + +# 等待操作完成并显示进度 +wait_with_progress() { + local command=$1 + local message=${2:-"执行中"} + local max_wait=${3:-60} + local interval=${4:-1} + local count=0 + + # 后台执行命令 + eval "$command" > /tmp/progress_output.log 2>&1 & + local pid=$! + + # 显示进度 + while kill -0 $pid 2>/dev/null && [ $count -lt $max_wait ]; do + progress_bar_with_message $count $max_wait "$message" + sleep $interval + count=$((count + interval)) + done + + # 等待命令完成 + wait $pid + local exit_code=$? + + # 清除进度条 + printf "\r${GREEN}[SUCCESS]${NC} $message 完成" + printf "%$((${#message} + 20))s" "" + echo "" + + return $exit_code +} + +# =========================================== +# 检测 Docker Compose 命令 +# =========================================== + +detect_docker_compose() { + # 优先使用 docker compose (v2) + if docker compose version &>/dev/null 2>&1; then + DOCKER_COMPOSE_CMD="docker compose" + log_info "使用 Docker Compose V2 (docker compose)" + # 回退到 docker-compose (v1) + elif command -v docker-compose &>/dev/null; then + DOCKER_COMPOSE_CMD="docker-compose" + log_info "使用 Docker Compose V1 (docker-compose)" + else + log_error "未找到 Docker Compose 命令" + exit 1 + fi +} + +# =========================================== +# 检查容器是否运行 +# =========================================== + +is_container_running() { + docker ps --format '{{.Names}}' | grep -q "^${CONTAINER_NAME}$" 2>/dev/null +} + +is_web_container_running() { + docker ps --format '{{.Names}}' | grep -q "^${WEB_CONTAINER_NAME}$" 2>/dev/null +} + +ensure_web_container_running() { + if ! is_web_container_running; then + log_error "Web 前端容器 $WEB_CONTAINER_NAME 未运行，请先启动 Docker Compose" + return 1 + fi + return 0 +} + +# =========================================== +# 检查容器是否存在（包括已停止的） +# =========================================== + +container_exists() { + docker ps -a --format '{{.Names}}' | grep -q "^${CONTAINER_NAME}$" 2>/dev/null +} + +# =========================================== +# 帮助信息 +# =========================================== + +show_help() { + echo "ECShopX 开发环境设置脚本" + echo "" + echo "用法: $0 [选项]" + echo "" + echo "选项:" + echo " --help, -h 显示帮助信息" + echo " --rebuild 强制重新构建镜像（不使用缓存）" + echo " --skip-admin 跳过 ECShopX_admin-frontend 编译" + echo " --skip-vshop 跳过 ECShopX_mobile-frontend 编译" + echo " --skip-pc 跳过 ECShopX_web-frontend 编译" + echo " --site-url URL 兼容快捷项：设置管理后台/API 地址，如 https://admin.example.com" + echo " --admin-url URL 覆盖管理后台访问地址" + echo " --h5-url URL 覆盖 H5 前端访问地址" + echo " --pc-url URL 覆盖 PC 前端访问地址" + echo "" + echo "示例:" + echo " $0 # 正常启动（使用缓存）" + echo " $0 --rebuild # 重新构建镜像" + echo " $0 --skip-admin # 跳过管理后台编译" + echo " $0 --site-url https://admin.example.com" + echo " $0 --admin-url https://admin.example.com --h5-url https://m.example.com --pc-url https://www.example.com" + echo "" + exit 0 +} + +# =========================================== +# 解析命令行参数 +# =========================================== + +parse_args() { + while [[ $# -gt 0 ]]; do + case $1 in + --help|-h) + show_help + ;; + --rebuild) + REBUILD=true + shift + ;; + --skip-admin) + SKIP_ADMIN=true + shift + ;; + --skip-vshop) + SKIP_VSHOP=true + shift + ;; + --skip-pc) + SKIP_PC=true + shift + ;; + --site-url) + if [ -z "${2:-}" ]; then + log_error "--site-url 需要提供 URL" + exit 1 + fi + SITE_URL="$2" + shift 2 + ;; + --admin-url) + if [ -z "${2:-}" ]; then + log_error "--admin-url 需要提供 URL" + exit 1 + fi + ADMIN_URL_OVERRIDE="$2" + shift 2 + ;; + --h5-url) + if [ -z "${2:-}" ]; then + log_error "--h5-url 需要提供 URL" + exit 1 + fi + H5_URL_OVERRIDE="$2" + shift 2 + ;; + --pc-url) + if [ -z "${2:-}" ]; then + log_error "--pc-url 需要提供 URL" + exit 1 + fi + PC_URL_OVERRIDE="$2" + shift 2 + ;; + *) + log_error "未知参数: $1" + echo "使用 --help 查看帮助信息" + exit 1 + ;; + esac + done +} + +# =========================================== +# 检测操作系统 +# =========================================== + +detect_os() { + if [[ "$OSTYPE" == "darwin"* ]]; then + OS="macos" + elif [[ "$OSTYPE" == "linux-gnu"* ]]; then + OS="linux" + else + log_error "不支持的操作系统: $OSTYPE" + exit 1 + fi + log_info "检测到操作系统: $OS" +} + +# =========================================== +# 检测 Docker +# =========================================== + +check_docker() { + log_info "检测 Docker 安装状态..." + + if ! command -v docker &> /dev/null; then + log_error "Docker 未安装" + log_info "安装方式:" + log_info " macOS: 下载 Docker Desktop https://www.docker.com/products/docker-desktop" + log_info " Linux: sudo apt-get install docker.io docker-compose (Ubuntu/Debian)" + exit 1 + fi + + # 检测 Docker Compose 命令 + detect_docker_compose + + # 检查 Docker 是否正在运行 + if ! docker info &> /dev/null 2>&1; then + log_warning "Docker 未运行，尝试自动启动..." + + if [ "$OS" = "macos" ]; then + open -a Docker + log_info "正在启动 Docker Desktop，请等待..." + + for i in {1..60}; do + if docker info &> /dev/null 2>&1; then + log_success "Docker 已启动" + break + fi + sleep 2 + if [ $((i % 5)) -eq 0 ]; then + log_info " 等待 Docker 启动... ($i/60)" + fi + done + + if ! docker info &> /dev/null 2>&1; then + log_error "Docker 启动超时，请手动启动 Docker Desktop 后重新运行脚本" + exit 1 + fi + elif [ "$OS" = "linux" ]; then + sudo systemctl start docker || { + log_error "Docker 启动失败，请手动启动" + exit 1 + } + sleep 3 + if ! docker info &> /dev/null 2>&1; then + log_error "Docker 启动失败" + exit 1 + fi + log_success "Docker 已启动" + fi + fi + + log_success "Docker 和 Docker Compose 已就绪" +} + +# =========================================== +# 检查并克隆前端项目 +# =========================================== + +check_and_clone_frontend() { + log_step "检查前端项目目录..." + + # 检查 ECShopX_web-frontend + PC_DIR="$PARENT_DIR/ECShopX_web-frontend" + PC_REPO="https://gitee.com/ShopeX/ECShopX_web-frontend.git" + + if [ ! -d "$PC_DIR" ] || [ ! -f "$PC_DIR/package.json" ]; then + if [ ! -d "$PC_DIR" ]; then + log_warning "ECShopX_web-frontend 目录不存在" + else + log_warning "ECShopX_web-frontend 目录存在但缺少 package.json" + fi + + echo "" + echo -n "是否从 Gitee 克隆PC商城（ECShopX_web-frontend）代码？ [Y/n]: " + read -r answer < /dev/tty + + if [ -z "$answer" ] || [ "$answer" = "Y" ] || [ "$answer" = "y" ] || [ "$answer" = "yes" ] || [ "$answer" = "YES" ]; then + if [ -d "$PC_DIR" ]; then + log_info "清空现有目录内容..." + find "$PC_DIR" -mindepth 1 -delete 2>/dev/null + fi + + log_info "正在从 Gitee 克隆PC商城（ECShopX_web-frontend）..." + git clone "$PC_REPO" "$PC_DIR" > /tmp/git_clone_pc.log 2>&1 & + local clone_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $clone_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 克隆PC商城（ECShopX_web-frontend）中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $clone_pid + local clone_exit=$? + + if [ $clone_exit -eq 0 ]; then + printf "\r${GREEN}[SUCCESS]${NC}PC商城（ECShopX_web-frontend）克隆成功" + printf "%50s" "" + echo "" + INSTALLED_PC=true + else + printf "\r${RED}[ERROR]${NC}PC商城（ECShopX_web-frontend）克隆失败" + printf "%50s" "" + echo "" + cat /tmp/git_clone_pc.log 2>/dev/null | tail -10 + exit 1 + fi + else + log_warning "跳过PC商城（ECShopX_web-frontend）克隆" + fi + else + log_info "ECShopX_web-frontend 目录已存在且包含 package.json，跳过克隆" + INSTALLED_PC=true + fi + + # 检查 ECShopX_admin-frontend + ADMIN_DIR="$PARENT_DIR/ECShopX_admin-frontend" + ADMIN_REPO="https://gitee.com/ShopeX/ECShopX_admin-frontend.git" + + if [ ! -d "$ADMIN_DIR" ] || [ ! -f "$ADMIN_DIR/package.json" ]; then + if [ ! -d "$ADMIN_DIR" ]; then + log_warning "ECShopX_admin-frontend 目录不存在" + else + log_warning "ECShopX_admin-frontend 目录存在但缺少 package.json" + fi + + echo "" + echo -n "是否从 Gitee 克隆管理后台（ECShopX_admin-frontend）代码？ [Y/n]: " + read -r answer < /dev/tty + + if [ -z "$answer" ] || [ "$answer" = "Y" ] || [ "$answer" = "y" ] || [ "$answer" = "yes" ] || [ "$answer" = "YES" ]; then + if [ -d "$ADMIN_DIR" ]; then + log_info "清空现有目录内容..." + find "$ADMIN_DIR" -mindepth 1 -delete 2>/dev/null + fi + + log_info "正在从 Gitee 克隆管理后台（ECShopX_admin-frontend）..." + git clone "$ADMIN_REPO" "$ADMIN_DIR" > /tmp/git_clone_admin.log 2>&1 & + local clone_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $clone_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 克隆管理后台（ECShopX_admin-frontend）中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $clone_pid + local clone_exit=$? + + if [ $clone_exit -eq 0 ]; then + printf "\r${GREEN}[SUCCESS]${NC} 管理后台（ECShopX_admin-frontend）克隆成功" + printf "%50s" "" + echo "" + INSTALLED_ADMIN=true + else + printf "\r${RED}[ERROR]${NC} 管理后台（ECShopX_admin-frontend）克隆失败" + printf "%50s" "" + echo "" + cat /tmp/git_clone_admin.log 2>/dev/null | tail -10 + exit 1 + fi + else + log_warning "跳过管理后台（ECShopX_admin-frontend）克隆" + fi + else + log_info "ECShopX_admin-frontend 目录已存在且包含 package.json，跳过克隆" + INSTALLED_ADMIN=true + fi + # 修复语法错误：注释掉重复的 else...fi 块（原代码第401-403行） + # else + # log_info "ECShopX_admin-frontend 目录已存在且包含 package.json，跳过克隆" + # fi + + # 检查 ECShopX_mobile-frontend + VSHOP_DIR="$PARENT_DIR/ECShopX_mobile-frontend" + VSHOP_REPO="https://gitee.com/ShopeX/ECShopX_mobile-frontend.git" + + if [ ! -d "$VSHOP_DIR" ] || [ ! -f "$VSHOP_DIR/package.json" ]; then + if [ ! -d "$VSHOP_DIR" ]; then + log_warning "ECShopX_mobile-frontend 目录不存在" + else + log_warning "ECShopX_mobile-frontend 目录存在但缺少 package.json" + fi + + echo "" + echo -n "是否从 Gitee 克隆移动商城（ECShopX_mobile-frontend）代码？ [Y/n]: " + read -r answer < /dev/tty + + if [ -z "$answer" ] || [ "$answer" = "Y" ] || [ "$answer" = "y" ] || [ "$answer" = "yes" ] || [ "$answer" = "YES" ]; then + if [ -d "$VSHOP_DIR" ]; then + log_info "清空现有目录内容..." + find "$VSHOP_DIR" -mindepth 1 -delete 2>/dev/null + fi + + log_info "正在从 Gitee 克隆移动商城（ECShopX_mobile-frontend）..." + git clone "$VSHOP_REPO" "$VSHOP_DIR" > /tmp/git_clone_vshop.log 2>&1 & + local clone_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $clone_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 克隆移动商城（ECShopX_mobile-frontend）中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $clone_pid + local clone_exit=$? + + if [ $clone_exit -eq 0 ]; then + printf "\r${GREEN}[SUCCESS]${NC}移动商城（ECShopX_mobile-frontend）克隆成功" + printf "%50s" "" + echo "" + INSTALLED_VSHOP=true + else + printf "\r${RED}[ERROR]${NC}移动商城（ECShopX_mobile-frontend）克隆失败" + printf "%50s" "" + echo "" + cat /tmp/git_clone_vshop.log 2>/dev/null | tail -10 + exit 1 + fi + else + log_warning "跳过移动商城（ECShopX_mobile-frontend）克隆" + fi + else + log_info "ECShopX_mobile-frontend 目录已存在且包含 package.json，跳过克隆" + INSTALLED_VSHOP=true + fi + + echo "" +} + +# =========================================== +# 检查容器状态 +# =========================================== + +check_container_status() { + # 检查容器是否存在（包括已停止的） + if docker ps -a --format '{{.Names}}' | grep -q "^${CONTAINER_NAME}$"; then + # 检查容器是否正在运行 + if docker ps --format '{{.Names}}' | grep -q "^${CONTAINER_NAME}$"; then + log_warning "容器 $CONTAINER_NAME 正在运行" + else + log_warning "容器 $CONTAINER_NAME 已存在但未运行" + fi + echo "" + echo -n "请选择操作: [1] 重启容器 [2] 使用现有容器 [3] 退出: " + read -r choice < /dev/tty + + case $choice in + 1) + log_info "停止并删除现有容器..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" down + return 0 # 需要重新构建 + ;; + 2) + log_info "使用现有容器..." + log_info "确保 Docker Compose 中的所有服务已启动..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" up -d + # 如果容器未运行，先启动它 + if ! is_container_running; then + log_info "启动现有容器..." + sleep 5 + wait_for_services + elif ! is_web_container_running; then + log_info "等待 Web 前端容器启动..." + sleep 5 + fi + return 1 # 跳过构建 + ;; + 3) + log_info "退出脚本" + exit 0 + ;; + *) + log_info "使用现有容器..." + log_info "确保 Docker Compose 中的所有服务已启动..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" up -d + return 1 + ;; + esac + fi + return 0 +} + +# =========================================== +# 配置环境文件 +# =========================================== + +configure_env() { + log_info "配置环境文件..." + cd "$PROJECT_ROOT" + + if [ ! -f ".env" ]; then + for template in ".env.full" ".env.example" ".env.template"; do + if [ -f "$template" ]; then + log_info "从 $template 复制创建 .env 文件..." + cp "$template" .env + break + fi + done + fi +} + +# =========================================== +# 构建并启动 Docker 容器 +# =========================================== + +run_docker() { + log_step "启动 Docker 容器..." + + cd "$PROJECT_ROOT" + + if [ ! -f "$DOCKER_COMPOSE_FILE" ]; then + log_error "未找到 $DOCKER_COMPOSE_FILE 文件" + exit 1 + fi + + # 构建镜像 + if [ "$REBUILD" = true ]; then + log_info "强制重新构建镜像（--no-cache）..." + log_info "这可能需要较长时间，请耐心等待..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" build --no-cache > /tmp/docker_build.log 2>&1 & + local build_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $build_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 构建 Docker 镜像中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.3 + done + wait $build_pid + local build_exit=$? + + if [ $build_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} Docker 镜像构建失败" + printf "%50s" "" + echo "" + cat /tmp/docker_build.log 2>/dev/null | tail -30 + exit 1 + else + printf "\r${GREEN}[SUCCESS]${NC} Docker 镜像构建完成" + printf "%50s" "" + echo "" + fi + else + log_info "构建镜像（使用缓存）..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" build > /tmp/docker_build.log 2>&1 & + local build_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $build_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 构建 Docker 镜像中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.3 + done + wait $build_pid + local build_exit=$? + + if [ $build_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} Docker 镜像构建失败" + printf "%50s" "" + echo "" + cat /tmp/docker_build.log 2>/dev/null | tail -30 + exit 1 + else + printf "\r${GREEN}[SUCCESS]${NC} Docker 镜像构建完成" + printf "%50s" "" + echo "" + fi + fi + + # 启动容器 + log_info "启动容器..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" up -d || { + log_error "Docker 服务启动失败" + exit 1 + } + + log_info "等待服务启动..." + sleep 5 + + # 显示容器状态 + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" ps + + # 等待服务就绪 + wait_for_services +} + +# =========================================== +# 等待服务就绪 +# =========================================== + +wait_for_services() { + # 等待 Supervisor + log_info "等待 Supervisor 启动..." + for i in {1..20}; do + if docker exec "$CONTAINER_NAME" supervisorctl status &>/dev/null 2>&1; then + break + fi + sleep 1 + done + + # 等待 MySQL + log_info "等待 MySQL 服务就绪..." + for i in {1..60}; do + if docker exec "$CONTAINER_NAME" mysqladmin ping --socket=/var/run/mysqld/mysqld.sock -u root -p"$MYSQL_ROOT_PWD" --silent 2>/dev/null || \ + docker exec "$CONTAINER_NAME" mysqladmin ping -h 127.0.0.1 -u root -p"$MYSQL_ROOT_PWD" --silent 2>/dev/null; then + log_success "MySQL 服务已就绪" + break + fi + sleep 2 + if [ $((i % 5)) -eq 0 ]; then + log_info " 等待 MySQL... ($i/60)" + fi + if [ $i -eq 60 ]; then + log_error "MySQL 服务启动超时" + docker exec "$CONTAINER_NAME" tail -n 30 /var/log/supervisor/mysql.log 2>/dev/null || true + exit 1 + fi + done + + # 等待 Redis + log_info "等待 Redis 服务就绪..." + for i in {1..30}; do + if docker exec "$CONTAINER_NAME" redis-cli -a "$REDIS_PASSWORD" ping 2>/dev/null | grep -q "PONG"; then + log_success "Redis 服务已就绪" + break + fi + sleep 2 + if [ $((i % 5)) -eq 0 ]; then + log_info " 等待 Redis... ($i/30)" + fi + if [ $i -eq 30 ]; then + log_error "Redis 服务启动超时" + docker exec "$CONTAINER_NAME" tail -n 30 /var/log/supervisor/redis.log 2>/dev/null || true + exit 1 + fi + done +} + +# =========================================== +# 从 ECShopX .env 读取 PRODUCT_MODEL 并设置 SELECTED_PLATFORM +# =========================================== + +read_product_model_from_env() { + if [ -n "$SELECTED_PLATFORM" ]; then + return 0 + fi + + local product_model="" + product_model=$(docker exec "$CONTAINER_NAME" sh -c \ + "cd /data/httpd/ECShopX && grep '^PRODUCT_MODEL=' .env 2>/dev/null | cut -d'=' -f2" 2>/dev/null) + + if [ "$product_model" = "standard" ]; then + SELECTED_PLATFORM="standard" + log_info "从 ECShopX 配置文件读取业务模式: B2C (PRODUCT_MODEL=standard)" + elif [ "$product_model" = "platform" ]; then + SELECTED_PLATFORM="platform" + log_info "从 ECShopX 配置文件读取业务模式: BBC (PRODUCT_MODEL=platform)" + else + log_warning "未能从 ECShopX 配置文件读取 PRODUCT_MODEL，将使用默认值 platform" + SELECTED_PLATFORM="platform" + fi +} + +# =========================================== +# 配置 PHP 应用 +# =========================================== + +configure_application() { + log_info "==========================================" + log_info "开始配置 ECShopX（PHP API）..." + log_info "==========================================" + + # 配置本地 .env 文件 + configure_env + + # 配置容器内 .env 文件 + log_info "配置应用环境..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + if [ ! -f .env ]; then \ + cp .env.example .env 2>/dev/null || cp .env.full .env 2>/dev/null || touch .env; \ + fi" || true + + # 更新数据库配置和存储配置 + log_info "更新 .env 配置..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + sed -i 's/^DB_HOST=.*/DB_HOST=127.0.0.1/' .env && \ + sed -i 's/^DB_PORT=.*/DB_PORT=3306/' .env && \ + sed -i 's/^DB_DATABASE=.*/DB_DATABASE=$MYSQL_DATABASE/' .env && \ + sed -i 's/^DB_USERNAME=.*/DB_USERNAME=$MYSQL_USER/' .env && \ + sed -i 's/^DB_PASSWORD=.*/DB_PASSWORD=$MYSQL_PASSWORD/' .env && \ + sed -i 's/^REDIS_HOST=.*/REDIS_HOST=127.0.0.1/' .env && \ + sed -i 's/^REDIS_PORT=.*/REDIS_PORT=6379/' .env && \ + sed -i 's/^REDIS_PASSWORD=.*/REDIS_PASSWORD=$REDIS_PASSWORD/' .env && \ + sed -i 's/^REDIS_DATABASE=.*/REDIS_DATABASE=0/' .env && \ + (grep -q '^DISK_DRIVER=' .env && sed -i 's/^DISK_DRIVER=.*/DISK_DRIVER=local/' .env || echo 'DISK_DRIVER=local' >> .env) && \ + (grep -q '^APP_URL=' .env && sed -i 's|^APP_URL=.*|APP_URL=$ADMIN_URL|' .env || echo 'APP_URL=$ADMIN_URL' >> .env) && \ + (grep -q '^H5_BASE_URL=' .env && sed -i 's|^H5_BASE_URL=.*|H5_BASE_URL=$H5_URL|' .env || echo 'H5_BASE_URL=$H5_URL' >> .env) && \ + (grep -q '^SHOP_ADMIN_URL=' .env && sed -i 's|^SHOP_ADMIN_URL=.*|SHOP_ADMIN_URL=$ADMIN_URL/|' .env || echo 'SHOP_ADMIN_URL=$ADMIN_URL/' >> .env) && \ + (grep -q '^API_BASE_URL=' .env && sed -i 's|^API_BASE_URL=.*|API_BASE_URL=$API_BASE_URL|' .env || echo 'API_BASE_URL=$API_BASE_URL' >> .env)" 2>/dev/null || true + + # 选择业务模式并写入 PRODUCT_MODEL + echo "" + log_info "请选择业务模式：" + log_info " 1) BBC (多商户入驻电商平台模式)" + log_info " 2) B2C (线上商城、O2O云店、内购商城、供应链线上商城等模式)" + echo "" + while true; do + read -r -p "请输入选项 (1 或 2，默认: 1): " BIZ_MODE_CHOICE < /dev/tty + BIZ_MODE_CHOICE=${BIZ_MODE_CHOICE:-1} + if [ "$BIZ_MODE_CHOICE" = "1" ] || [ "$BIZ_MODE_CHOICE" = "bbc" ]; then + SELECTED_PLATFORM="platform" + log_info "已选择业务模式: BBC (B2B2C)" + break + elif [ "$BIZ_MODE_CHOICE" = "2" ] || [ "$BIZ_MODE_CHOICE" = "b2c" ]; then + SELECTED_PLATFORM="standard" + log_info "已选择业务模式: B2C" + break + else + log_error "无效的选项，请输入 1 或 2" + fi + done + echo "" + + # 将 PRODUCT_MODEL 写入 ECShopX 的 .env + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + if grep -q '^PRODUCT_MODEL=' .env 2>/dev/null; then \ + sed -i 's/^PRODUCT_MODEL=.*/PRODUCT_MODEL=$SELECTED_PLATFORM/' .env; \ + else \ + echo 'PRODUCT_MODEL=$SELECTED_PLATFORM' >> .env; \ + fi" 2>/dev/null || true + log_success "已将 PRODUCT_MODEL=$SELECTED_PLATFORM 写入 ECShopX .env" + + # 安装 Composer 依赖 + log_info "检查并安装 Composer 依赖..." + + # 检查是否需要安装依赖 + NEED_INSTALL=$(docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + if [ ! -f composer.phar ]; then \ + echo 'ERROR'; \ + elif [ ! -d vendor ] || [ ! -f vendor/autoload.php ]; then \ + echo 'YES'; \ + else \ + echo 'NO'; \ + fi" 2>/dev/null) + + if [ "$NEED_INSTALL" = "ERROR" ]; then + log_error "composer.phar 文件不存在" + exit 1 + elif [ "$NEED_INSTALL" = "YES" ]; then + log_info "开始安装 Composer 依赖（这可能需要一些时间）..." + # 后台执行并显示进度 + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + php -d memory_limit=-1 composer.phar config repo.packagist composer https://mirrors.aliyun.com/composer/ 2>/dev/null || true && \ + php -d memory_limit=-1 composer.phar install -o --no-interaction --prefer-dist" > /tmp/composer_output.log 2>&1 & + local composer_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $composer_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 安装 Composer 依赖中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $composer_pid + local composer_exit=$? + + if [ $composer_exit -eq 0 ]; then + printf "\r${GREEN}[SUCCESS]${NC} Composer 依赖安装完成" + printf "%50s" "" + echo "" + else + printf "\r${RED}[ERROR]${NC} Composer 依赖安装失败" + printf "%50s" "" + echo "" + cat /tmp/composer_output.log 2>/dev/null | tail -20 + exit 1 + fi + else + log_success "Composer 依赖已存在，跳过安装" + fi + + # 生成应用密钥（仅在不存在时） + APP_KEY=$(docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && grep '^APP_KEY=' .env | cut -d'=' -f2" 2>/dev/null) + if [ -z "$APP_KEY" ] || [ "$APP_KEY" = "" ]; then + log_info "生成应用密钥..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && php artisan key:generate --force" 2>/dev/null || { + log_warning "应用密钥生成失败" + } + else + log_info "应用密钥已存在，跳过生成" + fi + + # 迁移前修正 ECShopX 目录权限（容器内 www-data:www-data） + log_info "修正 ECShopX 目录权限为 www-data:www-data..." + docker exec "$CONTAINER_NAME" chown -R www-data:www-data /data/httpd/ECShopX 2>/dev/null || { + log_warning "修正目录权限失败，继续执行迁移" + } + + # 执行数据库迁移 + log_info "执行数据库迁移..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && php artisan doctrine:migrations:migrate --no-interaction" > /tmp/migration_output.log 2>&1 & + local migration_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $migration_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 执行数据库迁移中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $migration_pid + local migration_exit=$? + + if [ $migration_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} 数据库迁移失败" + printf "%50s" "" + echo "" + cat /tmp/migration_output.log 2>/dev/null | tail -20 + log_info "请手动执行: docker exec $CONTAINER_NAME sh -c 'cd /data/httpd/ECShopX && php artisan doctrine:migrations:migrate --no-interaction'" + exit 1 + else + printf "\r${GREEN}[SUCCESS]${NC} 数据库迁移完成" + printf "%50s" "" + echo "" + fi + + # 创建存储链接（storage:link） + log_info "创建存储目录链接..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && \ + if [ ! -L public/storage ] && [ ! -d public/storage ]; then \ + php artisan storage:link 2>/dev/null || true; \ + fi" || { + log_warning "存储链接创建失败，将稍后重试" + } + log_success "存储链接配置完成" + + # 初始化管理员密码 + init_admin_password +} + +# =========================================== +# 初始化管理员密码 +# =========================================== + +init_admin_password() { + echo "" + while true; do + echo -n "请输入管理员密码: " + read -rs admin_password < /dev/tty + echo "" # 换行 + + if [ -z "$admin_password" ]; then + log_warning "密码不能为空，请重新输入" + continue + fi + + echo -n "请再次确认密码: " + read -rs admin_password_confirm < /dev/tty + echo "" # 换行 + + if [ "$admin_password" != "$admin_password_confirm" ]; then + log_warning "两次输入的密码不一致，请重新输入" + continue + fi + break + done + + log_info "初始化管理员密码..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX && php artisan account:init-admin-password '$admin_password'" || { + log_warning "管理员密码初始化失败" + } + log_success "管理员密码初始化完成" +} + +# =========================================== +# Crontab 与队列（Supervisor） +# =========================================== + +configure_cron_and_supervisor_queues() { + log_info "==========================================" + log_info "配置 Crontab 定时任务与队列（Supervisor）..." + log_info "==========================================" + + if ! is_container_running; then + log_warning "容器未运行，跳过 Crontab 与队列配置" + return 0 + fi + + local cron_dir="$PROJECT_ROOT/docker-dev/cron" + local sup_dir="$PROJECT_ROOT/docker-dev/supervisor" + + if [ -d "$cron_dir" ]; then + local has_cron=false + for f in "$cron_dir"/*; do + [ -e "$f" ] || continue + [ -f "$f" ] || continue + has_cron=true + local user + user=$(basename "$f") + log_info "安装 crontab（用户: $user）: $f" + docker cp "$f" "$CONTAINER_NAME:/tmp/crontab.install.$user" + if docker exec "$CONTAINER_NAME" sh -c "crontab -u "$user" "/tmp/crontab.install.$user"" 2>/dev/null; then + log_success "crontab 已安装: $user" + else + log_warning "crontab 安装失败（用户: $user）。请确认镜像已包含 dcron 且 supervisord 已配置 [program:crond]，必要时执行: $0 --rebuild" + fi + done + if [ "$has_cron" = false ]; then + log_warning "目录 $cron_dir 下无 crontab 文件" + else + if docker exec "$CONTAINER_NAME" supervisorctl status crond &>/dev/null; then + docker exec "$CONTAINER_NAME" supervisorctl restart crond 2>/dev/null || true + fi + fi + else + log_warning "未找到目录: $cron_dir，跳过 Crontab" + fi + + if [ ! -d "$sup_dir" ]; then + log_warning "未找到目录: $sup_dir，跳过队列配置" + return 0 + fi + + local has_sup=false + for ini in "$sup_dir"/*.ini; do + [ -f "$ini" ] || continue + has_sup=true + local base + base=$(basename "$ini" .ini) + log_info "安装 Supervisor 片段: ${base}.conf" + docker cp "$ini" "$CONTAINER_NAME:/etc/supervisor/conf.d/${base}.conf" + done + + if [ "$has_sup" = false ]; then + log_warning "目录 $sup_dir 下无 .ini 配置" + return 0 + fi + + log_info "重新加载 Supervisor 并应用队列配置..." + if docker exec "$CONTAINER_NAME" supervisorctl reread 2>/dev/null && \ + docker exec "$CONTAINER_NAME" supervisorctl update 2>/dev/null; then + log_success "Supervisor 已重新加载，队列进程应已启动" + else + log_warning "supervisorctl reread/update 未完全成功，尝试 reload..." + docker exec "$CONTAINER_NAME" supervisorctl reload 2>/dev/null || { + log_warning "Supervisor 重载失败，请重启容器: docker restart $CONTAINER_NAME" + } + fi + log_success "Crontab 与队列配置步骤完成" +} + +# =========================================== +# 检查容器内目录是否存在并挂载正确 +# =========================================== + +check_container_directory() { + local container_path=$1 + local host_path=$2 + local project_name=$3 + local max_retries=2 + local retry_count=0 + local target_container="$CONTAINER_NAME" + + if [ "$project_name" = "ECShopX_web-frontend" ]; then + target_container="$WEB_CONTAINER_NAME" + fi + + # 首先检查容器是否运行 + if ! docker ps --format '{{.Names}}' | grep -q "^${target_container}$" 2>/dev/null; then + log_warning "容器 $target_container 未运行，无法检查目录挂载状态" + log_info "目录挂载将在容器启动后自动生效" + return 0 # 容器未运行时，假设挂载会在启动后生效 + fi + + while [ $retry_count -lt $max_retries ]; do + # 检查目录是否存在 + if docker exec "$target_container" sh -c "test -d $container_path" 2>/dev/null; then + # 检查 package.json 是否存在 + if docker exec "$target_container" sh -c "test -f $container_path/package.json" 2>/dev/null; then + log_success "目录挂载检查通过: $target_container:$container_path" + return 0 # 目录和文件都存在 + else + if [ $retry_count -eq 0 ]; then + log_warning "容器 $target_container 内 $container_path/package.json 不存在，尝试重启容器以确保目录正确挂载..." + if ! restart_container_for_mount "$project_name"; then + return 1 + fi + retry_count=$((retry_count + 1)) + continue + else + log_error "容器 $target_container 内 $container_path/package.json 仍然不存在" + log_info "请检查主机目录 $host_path 是否存在且包含 package.json" + return 1 + fi + fi + else + if [ $retry_count -eq 0 ]; then + log_warning "容器 $target_container 内 $container_path 目录不存在，尝试重启容器以确保目录正确挂载..." + if ! restart_container_for_mount "$project_name"; then + return 1 + fi + retry_count=$((retry_count + 1)) + continue + else + log_error "容器 $target_container 内 $container_path 目录仍然不存在" + log_info "请检查 docker-compose.dev.yml 中的卷挂载配置是否正确" + log_info "主机目录路径: $host_path" + return 1 + fi + fi + done + + return 1 +} + +# =========================================== +# 重启容器以确保目录挂载 +# =========================================== + +restart_container_for_mount() { + local project_name=$1 + local target_container="$CONTAINER_NAME" + + if [ "$project_name" = "ECShopX_web-frontend" ]; then + target_container="$WEB_CONTAINER_NAME" + fi + + log_warning "检测到 $project_name 目录未正确挂载，正在重启容器..." + + if docker ps --format '{{.Names}}' | grep -q "^${target_container}$" 2>/dev/null; then + log_info "重启容器 $target_container..." + $DOCKER_COMPOSE_CMD -f "$DOCKER_COMPOSE_FILE" restart "$target_container" || { + log_error "容器重启失败" + return 1 + } + + log_info "等待容器启动..." + sleep 5 + + if [ "$target_container" = "$CONTAINER_NAME" ]; then + # 等待主服务就绪 + wait_for_services + fi + + log_success "容器重启完成" + return 0 + else + log_warning "容器未运行，无需重启" + return 0 + fi +} + +# =========================================== +# 配置前端项目的 .env 文件 +# =========================================== + +configure_frontend_env() { + local project_dir=$1 + local project_name=$2 + local api_base_url=${3:-"http://localhost:8080/api/"} + local app_id=${4:-""} + local default_lang=${5:-""} + local pc_url=${6:-"$PC_URL"} + local qiankun_entry_url=${7:-"$QIANKUN_ENTRY_URL"} + local target_container="$CONTAINER_NAME" + + # 检查主机目录是否存在 + if [ ! -d "$project_dir" ]; then + log_warning "$project_name 目录不存在，跳过配置" + return 0 + fi + + # 检查容器内目录是否存在 + local container_path="" + if [ "$project_name" = "ECShopX_admin-frontend" ]; then + container_path="/data/httpd/ECShopX_admin-frontend" + elif [ "$project_name" = "ECShopX_mobile-frontend" ]; then + container_path="/data/httpd/ECShopX_mobile-frontend" + elif [ "$project_name" = "ECShopX_web-frontend" ]; then + container_path="/data/httpd/ECShopX_web-frontend" + target_container="$WEB_CONTAINER_NAME" + else + log_warning "未知的项目名称: $project_name" + return 0 + fi + + # 如果容器未运行，直接配置主机目录 + if ! docker ps --format '{{.Names}}' | grep -q "^${target_container}$" 2>/dev/null; then + log_info "容器 $target_container 未运行，配置主机目录的 .env 文件..." + local env_file="$project_dir/.env" + + # 如果 .env 不存在，尝试从 .env.example 复制 + if [ ! -f "$env_file" ]; then + if [ -f "$project_dir/.env.example" ]; then + log_info "从 .env.example 创建 .env 文件..." + cp "$project_dir/.env.example" "$env_file" + else + log_info "创建新的 .env 文件..." + touch "$env_file" + fi + fi + + # 配置 ECShopX_admin-frontend + if [ "$project_name" = "ECShopX_admin-frontend" ]; then + # 使用 sed 修改或添加 VUE_APP_BASE_API + if grep -q "^VUE_APP_BASE_API=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^VUE_APP_BASE_API=.*|VUE_APP_BASE_API=$api_base_url|" "$env_file" + else + sed -i "s|^VUE_APP_BASE_API=.*|VUE_APP_BASE_API=$api_base_url|" "$env_file" + fi + else + echo "VUE_APP_BASE_API=$api_base_url" >> "$env_file" + fi + log_success "已配置 VUE_APP_BASE_API=$api_base_url" + + # 配置 VUE_APP_DEFAULT_LANG（如果提供） + if [ -n "$default_lang" ]; then + if grep -q "^VUE_APP_DEFAULT_LANG=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^VUE_APP_DEFAULT_LANG=.*|VUE_APP_DEFAULT_LANG=$default_lang|" "$env_file" + else + sed -i "s|^VUE_APP_DEFAULT_LANG=.*|VUE_APP_DEFAULT_LANG=$default_lang|" "$env_file" + fi + else + echo "VUE_APP_DEFAULT_LANG=$default_lang" >> "$env_file" + fi + log_success "已配置 VUE_APP_DEFAULT_LANG=$default_lang" + fi + + # 配置 VUE_APP_QIANKUN_ENTRY + if grep -q "^VUE_APP_QIANKUN_ENTRY=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^VUE_APP_QIANKUN_ENTRY=.*|VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url|" "$env_file" + else + sed -i "s|^VUE_APP_QIANKUN_ENTRY=.*|VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url|" "$env_file" + fi + else + echo "VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url" >> "$env_file" + fi + log_success "已配置 VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url" + + # 配置 VUE_APP_WEBSITE（PC前端访问地址） + if [ "$INSTALLED_PC" = true ]; then + if grep -q "^VUE_APP_WEBSITE=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^VUE_APP_WEBSITE=.*|VUE_APP_WEBSITE=$pc_url|" "$env_file" + else + sed -i "s|^VUE_APP_WEBSITE=.*|VUE_APP_WEBSITE=$pc_url|" "$env_file" + fi + else + echo "VUE_APP_WEBSITE=$pc_url" >> "$env_file" + fi + log_success "已配置 VUE_APP_WEBSITE=$pc_url" + fi + fi + + # 配置 ECShopX_mobile-frontend + if [ "$project_name" = "ECShopX_mobile-frontend" ]; then + # 使用 sed 修改或添加 APP_BASE_URL + if grep -q "^APP_BASE_URL=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^APP_BASE_URL=.*|APP_BASE_URL=$api_base_url|" "$env_file" + else + sed -i "s|^APP_BASE_URL=.*|APP_BASE_URL=$api_base_url|" "$env_file" + fi + else + echo "APP_BASE_URL=$api_base_url" >> "$env_file" + fi + log_success "已配置 APP_BASE_URL=$api_base_url" + + # 配置 APP_PLATFORM（如果提供） + if [ -n "$app_id" ]; then + if grep -q "^APP_PLATFORM=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^APP_PLATFORM=.*|APP_PLATFORM=$app_id|" "$env_file" + else + sed -i "s|^APP_PLATFORM=.*|APP_PLATFORM=$app_id|" "$env_file" + fi + else + echo "APP_PLATFORM=$app_id" >> "$env_file" + fi + log_success "已配置 APP_PLATFORM=$app_id" + fi + + # 配置 APP_I18N_ORIGIN_LANG（如果提供） + if [ -n "$default_lang" ]; then + if grep -q "^APP_I18N_ORIGIN_LANG=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^APP_I18N_ORIGIN_LANG=.*|APP_I18N_ORIGIN_LANG=$default_lang|" "$env_file" + else + sed -i "s|^APP_I18N_ORIGIN_LANG=.*|APP_I18N_ORIGIN_LANG=$default_lang|" "$env_file" + fi + else + echo "APP_I18N_ORIGIN_LANG=$default_lang" >> "$env_file" + fi + log_success "已配置 APP_I18N_ORIGIN_LANG=$default_lang" + fi + fi + + # 配置 ECShopX_web-frontend + if [ "$project_name" = "ECShopX_web-frontend" ]; then + # 使用 sed 修改或添加 NUXT_PUBLIC_API_BASE + if grep -q "^NUXT_PUBLIC_API_BASE=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^NUXT_PUBLIC_API_BASE=.*|NUXT_PUBLIC_API_BASE=$api_base_url|" "$env_file" + else + sed -i "s|^NUXT_PUBLIC_API_BASE=.*|NUXT_PUBLIC_API_BASE=$api_base_url|" "$env_file" + fi + else + echo "NUXT_PUBLIC_API_BASE=$api_base_url" >> "$env_file" + fi + log_success "已配置 NUXT_PUBLIC_API_BASE=$api_base_url" + + # 配置 NUXT_PUBLIC_COMPANY_ID（默认值为1） + if grep -q "^NUXT_PUBLIC_COMPANY_ID=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^NUXT_PUBLIC_COMPANY_ID=.*|NUXT_PUBLIC_COMPANY_ID=1|" "$env_file" + else + sed -i "s|^NUXT_PUBLIC_COMPANY_ID=.*|NUXT_PUBLIC_COMPANY_ID=1|" "$env_file" + fi + else + echo "NUXT_PUBLIC_COMPANY_ID=1" >> "$env_file" + fi + log_success "已配置 NUXT_PUBLIC_COMPANY_ID=1" + + # 配置 NUXT_PUBLIC_DEFAULT_COUNTRY_CODE（如果提供） + if [ -n "$default_lang" ]; then + if grep -q "^NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=" "$env_file" 2>/dev/null; then + # macOS 和 Linux 兼容的 sed 命令 + if [[ "$OSTYPE" == "darwin"* ]]; then + sed -i '' "s|^NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=.*|NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang|" "$env_file" + else + sed -i "s|^NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=.*|NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang|" "$env_file" + fi + else + echo "NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang" >> "$env_file" + fi + log_success "已配置 NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang" + fi + fi + else + # 容器运行中，配置容器内的 .env 文件 + # 检查容器内目录是否存在 + if ! docker exec "$target_container" sh -c "test -d $container_path" 2>/dev/null; then + log_warning "容器 $target_container 内 $container_path 目录不存在，跳过配置" + return 0 + fi + + # 在容器内配置 .env 文件 + docker exec "$target_container" sh -c " + cd $container_path && \ + if [ ! -f .env ]; then + if [ -f .env.example ]; then + cp .env.example .env + else + touch .env + fi + fi + " 2>/dev/null || true + + # 配置 ECShopX_admin-frontend + if [ "$project_name" = "ECShopX_admin-frontend" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^VUE_APP_BASE_API=' .env 2>/dev/null; then + sed -i 's|^VUE_APP_BASE_API=.*|VUE_APP_BASE_API=$api_base_url|' .env + else + echo 'VUE_APP_BASE_API=$api_base_url' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 VUE_APP_BASE_API=$api_base_url" + + # 配置 VUE_APP_DEFAULT_LANG（如果提供） + if [ -n "$default_lang" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^VUE_APP_DEFAULT_LANG=' .env 2>/dev/null; then + sed -i 's|^VUE_APP_DEFAULT_LANG=.*|VUE_APP_DEFAULT_LANG=$default_lang|' .env + else + echo 'VUE_APP_DEFAULT_LANG=$default_lang' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 VUE_APP_DEFAULT_LANG=$default_lang" + fi + + # 配置 VUE_APP_QIANKUN_ENTRY + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^VUE_APP_QIANKUN_ENTRY=' .env 2>/dev/null; then + sed -i 's|^VUE_APP_QIANKUN_ENTRY=.*|VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url|' .env + else + echo 'VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 VUE_APP_QIANKUN_ENTRY=$qiankun_entry_url" + + # 配置 VUE_APP_WEBSITE（PC前端访问地址） + if [ "$INSTALLED_PC" = true ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^VUE_APP_WEBSITE=' .env 2>/dev/null; then + sed -i 's|^VUE_APP_WEBSITE=.*|VUE_APP_WEBSITE=$pc_url|' .env + else + echo 'VUE_APP_WEBSITE=$pc_url' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 VUE_APP_WEBSITE=$pc_url" + fi + fi + + # 配置 ECShopX_mobile-frontend + if [ "$project_name" = "ECShopX_mobile-frontend" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^APP_BASE_URL=' .env 2>/dev/null; then + sed -i 's|^APP_BASE_URL=.*|APP_BASE_URL=$api_base_url|' .env + else + echo 'APP_BASE_URL=$api_base_url' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 APP_BASE_URL=$api_base_url" + + # 配置 APP_PLATFORM（如果提供） + if [ -n "$app_id" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^APP_PLATFORM=' .env 2>/dev/null; then + sed -i 's|^APP_PLATFORM=.*|APP_PLATFORM=$app_id|' .env + else + echo 'APP_PLATFORM=$app_id' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 APP_PLATFORM=$app_id" + fi + + # 配置 APP_I18N_ORIGIN_LANG（如果提供） + if [ -n "$default_lang" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^APP_I18N_ORIGIN_LANG=' .env 2>/dev/null; then + sed -i 's|^APP_I18N_ORIGIN_LANG=.*|APP_I18N_ORIGIN_LANG=$default_lang|' .env + else + echo 'APP_I18N_ORIGIN_LANG=$default_lang' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 APP_I18N_ORIGIN_LANG=$default_lang" + fi + fi + + # 配置 ECShopX_web-frontend + if [ "$project_name" = "ECShopX_web-frontend" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^NUXT_PUBLIC_API_BASE=' .env 2>/dev/null; then + sed -i 's|^NUXT_PUBLIC_API_BASE=.*|NUXT_PUBLIC_API_BASE=$api_base_url|' .env + else + echo 'NUXT_PUBLIC_API_BASE=$api_base_url' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 NUXT_PUBLIC_API_BASE=$api_base_url" + + # 配置 NUXT_PUBLIC_COMPANY_ID（默认值为1） + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^NUXT_PUBLIC_COMPANY_ID=' .env 2>/dev/null; then + sed -i 's|^NUXT_PUBLIC_COMPANY_ID=.*|NUXT_PUBLIC_COMPANY_ID=1|' .env + else + echo 'NUXT_PUBLIC_COMPANY_ID=1' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 NUXT_PUBLIC_COMPANY_ID=1" + + # 配置 NUXT_PUBLIC_DEFAULT_COUNTRY_CODE（如果提供） + if [ -n "$default_lang" ]; then + docker exec "$target_container" sh -c " + cd $container_path && \ + if grep -q '^NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=' .env 2>/dev/null; then + sed -i 's|^NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=.*|NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang|' .env + else + echo 'NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang' >> .env + fi + " 2>/dev/null || true + log_success "已配置容器内 NUXT_PUBLIC_DEFAULT_COUNTRY_CODE=$default_lang" + fi + fi + fi +} + +# =========================================== +# 编译 ECShopX_admin-frontend +# =========================================== + +build_admin() { + if [ "$SKIP_ADMIN" = true ]; then + log_info "跳过 ECShopX_admin-frontend 编译（--skip-admin）" + return 0 + fi + + ADMIN_DIR="$PARENT_DIR/ECShopX_admin-frontend" + + if [ ! -d "$ADMIN_DIR" ]; then + log_warning "ECShopX_admin-frontend 目录不存在，跳过编译" + return 0 + fi + + log_info "==========================================" + log_info "开始编译 ECShopX_admin-frontend（管理后台）..." + log_info "==========================================" + + if [ ! -f "$ADMIN_DIR/package.json" ]; then + log_error "ECShopX_admin-frontend/package.json 不存在" + return 1 + fi + + # 检查是否已有编译产物 + if [ -d "$ADMIN_DIR/dist" ] && [ -f "$ADMIN_DIR/dist/index.html" ]; then + log_info "检测到已有编译产物，跳过编译" + log_info "如需重新编译，请删除 ECShopX_admin-frontend/dist 目录" + return 0 + fi + + # 检查容器内目录是否存在并确保正确挂载 + log_info "检查容器内目录挂载状态..." + if ! check_container_directory "/data/httpd/ECShopX_admin-frontend" "$ADMIN_DIR" "ECShopX_admin-frontend"; then + return 1 + fi + + # 确认默认语言（如果还未选择） + if [ -z "$SELECTED_LANG" ]; then + echo "" + log_info "请选择默认语言：" + log_info " 1) 中文 (zhcn)" + log_info " 2) 英文 (en)" + echo "" + while true; do + read -r -p "请输入选项 (1 或 2，默认: 1): " LANG_CHOICE < /dev/tty + LANG_CHOICE=${LANG_CHOICE:-1} + if [ "$LANG_CHOICE" = "1" ] || [ "$LANG_CHOICE" = "zhcn" ] || [ "$LANG_CHOICE" = "zh" ]; then + SELECTED_LANG="zhcn" + break + elif [ "$LANG_CHOICE" = "2" ] || [ "$LANG_CHOICE" = "en" ] || [ "$LANG_CHOICE" = "english" ]; then + SELECTED_LANG="en" + break + else + log_error "无效的选项，请输入 1 或 2" + fi + done + echo "" + log_info "已选择默认语言: $SELECTED_LANG" + echo "" + else + log_info "复用已选择的默认语言: $SELECTED_LANG" + fi + + # 配置前端项目的 .env 文件 + log_info "配置 ECShopX_admin-frontend 的 .env 文件..." + configure_frontend_env "$ADMIN_DIR" "ECShopX_admin-frontend" "$API_BASE_URL" "" "$SELECTED_LANG" "$PC_URL" "$QIANKUN_ENTRY_URL" + + log_info "安装 npm 依赖..." + # 使用绝对路径并先验证目录存在 + docker exec "$CONTAINER_NAME" sh -c " + if [ ! -d /data/httpd/ECShopX_admin-frontend ]; then + echo '错误: 目录不存在' + exit 1 + fi + cd /data/httpd/ECShopX_admin-frontend || exit 1 + npm install --legacy-peer-deps + " > /tmp/npm_admin_output.log 2>&1 & + local npm_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $npm_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 安装 ECShopX_admin-frontend npm 依赖中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $npm_pid + local npm_exit=$? + + if [ $npm_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_admin-frontend npm install 失败" + printf "%50s" "" + echo "" + cat /tmp/npm_admin_output.log 2>/dev/null | tail -20 + log_info "请检查容器内目录状态: docker exec $CONTAINER_NAME ls -la /data/httpd/ECShopX_admin-frontend" + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_admin-frontend npm 依赖安装完成" + printf "%50s" "" + echo "" + fi + + # 从 ECShopX 配置文件读取业务模式 + read_product_model_from_env + + if [ "$SELECTED_PLATFORM" = "standard" ]; then + BUILD_CMD="build:b2c" + BUILD_MODE_NAME="B2C" + else + BUILD_CMD="build:bbc" + BUILD_MODE_NAME="BBC (B2B2C)" + fi + log_info "使用业务模式: $BUILD_MODE_NAME" + echo "" + + log_info "开始前端环境编译" + log_info "编译时长依赖本地硬件性能，耗时较长请耐心等待" + log_info "举列：Mac M2芯片预计整体耗时15分钟" + echo "" + + log_info "执行编译命令: npm run $BUILD_CMD" + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX_admin-frontend && npm run $BUILD_CMD" > /tmp/build_admin_output.log 2>&1 & + local build_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $build_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 编译 ECShopX_admin-frontend 中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $build_pid + local build_exit=$? + + if [ $build_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_admin-frontend 编译失败" + printf "%50s" "" + echo "" + cat /tmp/build_admin_output.log 2>/dev/null | tail -20 + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_admin-frontend 编译完成" + printf "%50s" "" + echo "" + fi + + if docker exec "$CONTAINER_NAME" sh -c "[ -f /data/httpd/ECShopX_admin-frontend/dist/index.html ]"; then + log_success "ECShopX_admin-frontend 编译成功" + return 0 + else + log_error "ECShopX_admin-frontend 编译输出不完整" + return 1 + fi +} + +# =========================================== +# 编译 ECShopX_web-frontend +# =========================================== + +build_pc() { + if [ "$SKIP_PC" = true ]; then + log_info "跳过 ECShopX_web-frontend 编译（--skip-pc）" + return 0 + fi + + PC_DIR="$PARENT_DIR/ECShopX_web-frontend" + + if [ ! -d "$PC_DIR" ]; then + log_warning "ECShopX_web-frontend 目录不存在，跳过编译" + return 0 + fi + + log_info "==========================================" + log_info "开始编译 ECShopX_web-frontend（PC前端）..." + log_info "==========================================" + + if [ ! -f "$PC_DIR/package.json" ]; then + log_error "ECShopX_web-frontend/package.json 不存在" + return 1 + fi + + if ! ensure_web_container_running; then + return 1 + fi + + # 检查是否已有可启动的 Nuxt 生产产物（.nuxt 可能由 pnpm install/postinstall 生成，不能代表已编译完成） + if docker exec "$WEB_CONTAINER_NAME" sh -c "[ -f /data/httpd/ECShopX_web-frontend/.output/server/index.mjs ]" 2>/dev/null || \ + [ -f "$PC_DIR/.output/server/index.mjs" ]; then + log_info "检测到已有 Nuxt 生产编译产物，跳过编译" + log_info "如需重新编译，请删除 ECShopX_web-frontend/.output 目录" + # 即使跳过编译，也需要启动Nuxt服务 + need_build=false + else + need_build=true + fi + + # 检查容器内目录是否存在并确保正确挂载 + log_info "检查容器内目录挂载状态..." + if ! check_container_directory "/data/httpd/ECShopX_web-frontend" "$PC_DIR" "ECShopX_web-frontend"; then + return 1 + fi + + # 如果跳过编译，直接启动Nuxt服务，不需要确认语言 + if [ "$need_build" = false ]; then + # 启动 Nuxt 服务 + log_info "启动 Nuxt 服务（监听3000端口）..." + + # 检查是否已有Nuxt进程在运行 + if docker exec "$WEB_CONTAINER_NAME" sh -c "pgrep -f 'nuxt.*3000|pnpm.*preview|pnpm.*dev|node .*\\.output/server/index\\.mjs' > /dev/null" 2>/dev/null; then + log_info "Nuxt 服务已在运行" + else + # 启动已编译的 Nuxt 服务 + docker exec -d "$WEB_CONTAINER_NAME" sh -c " + cd /data/httpd/ECShopX_web-frontend && \ + NITRO_HOST=0.0.0.0 NITRO_PORT=3000 HOST=0.0.0.0 PORT=3000 nohup node .output/server/index.mjs > /var/log/nuxt.log 2>&1 & + " 2>/dev/null || true + + # 等待Nuxt服务启动 + sleep 3 + fi + + # 重新加载nginx配置 + docker exec "$CONTAINER_NAME" sh -c "nginx -s reload" 2>/dev/null || true + return 0 + fi + + # 只有在需要编译时才确认默认语言和配置.env + if [ "$need_build" = true ]; then + # 确认默认语言（如果还未选择） + if [ -z "$SELECTED_LANG" ]; then + echo "" + log_info "请选择默认语言：" + log_info " 1) 中文 (zhcn)" + log_info " 2) 英文 (en)" + echo "" + while true; do + read -r -p "请输入选项 (1 或 2，默认: 1): " LANG_CHOICE < /dev/tty + LANG_CHOICE=${LANG_CHOICE:-1} + if [ "$LANG_CHOICE" = "1" ] || [ "$LANG_CHOICE" = "zhcn" ] || [ "$LANG_CHOICE" = "zh" ]; then + SELECTED_LANG="zhcn" + break + elif [ "$LANG_CHOICE" = "2" ] || [ "$LANG_CHOICE" = "en" ] || [ "$LANG_CHOICE" = "english" ]; then + SELECTED_LANG="en" + break + else + log_error "无效的选项，请输入 1 或 2" + fi + done + echo "" + log_info "已选择默认语言: $SELECTED_LANG" + echo "" + else + log_info "复用已选择的默认语言: $SELECTED_LANG" + fi + + # 配置前端项目的 .env 文件 + log_info "配置 ECShopX_web-frontend 的 .env 文件..." + configure_frontend_env "$PC_DIR" "ECShopX_web-frontend" "$PC_API_URL" "" "$SELECTED_LANG" + + log_info "启用 pnpm 并安装依赖..." + # 使用绝对路径并先验证目录存在 + docker exec "$WEB_CONTAINER_NAME" sh -c " + if [ ! -d /data/httpd/ECShopX_web-frontend ]; then + echo '错误: 目录不存在' + exit 1 + fi + cd /data/httpd/ECShopX_web-frontend || exit 1 + corepack enable + PNPM_HOME=/tmp/pnpm pnpm install --store-dir /tmp/pnpm-store + " > /tmp/npm_pc_output.log 2>&1 & + local npm_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $npm_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 安装 ECShopX_web-frontend pnpm 依赖中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $npm_pid + local npm_exit=$? + + if [ $npm_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_web-frontend pnpm install 失败" + printf "%50s" "" + echo "" + cat /tmp/npm_pc_output.log 2>/dev/null | tail -20 + log_info "请检查容器内目录状态: docker exec $WEB_CONTAINER_NAME ls -la /data/httpd/ECShopX_web-frontend" + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_web-frontend pnpm 依赖安装完成" + printf "%50s" "" + echo "" + fi + + log_info "执行编译（pnpm build）..." + docker exec "$WEB_CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX_web-frontend && PNPM_HOME=/tmp/pnpm pnpm build" > /tmp/build_pc_output.log 2>&1 & + local build_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $build_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 编译 ECShopX_web-frontend 中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $build_pid + local build_exit=$? + + if [ $build_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_web-frontend 编译失败" + printf "%50s" "" + echo "" + cat /tmp/build_pc_output.log 2>/dev/null | tail -20 + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_web-frontend 编译完成" + printf "%50s" "" + echo "" + fi + # 验证编译产物 + if ! docker exec "$WEB_CONTAINER_NAME" sh -c "[ -f /data/httpd/ECShopX_web-frontend/.output/server/index.mjs ]" 2>/dev/null; then + log_error "ECShopX_web-frontend 编译输出不完整" + return 1 + fi + fi + + # 检查可启动的 Nuxt 生产编译产物 + if docker exec "$WEB_CONTAINER_NAME" sh -c "[ -f /data/httpd/ECShopX_web-frontend/.output/server/index.mjs ]" 2>/dev/null; then + log_success "ECShopX_web-frontend 编译成功" + + # 启动 Nuxt 服务 + log_info "启动 Nuxt 服务（监听3000端口）..." + + # 检查是否已有Nuxt进程在运行 + if docker exec "$WEB_CONTAINER_NAME" sh -c "pgrep -f 'nuxt.*3000|pnpm.*preview|pnpm.*dev|node .*\\.output/server/index\\.mjs' > /dev/null" 2>/dev/null; then + log_info "Nuxt 服务已在运行，重启服务..." + docker exec "$WEB_CONTAINER_NAME" sh -c "pkill -f 'nuxt.*3000|pnpm.*preview|pnpm.*dev|node .*\\.output/server/index\\.mjs'" 2>/dev/null || true + sleep 2 + fi + + # 在后台启动Nuxt服务 + log_info "使用生产模式启动（node .output/server/index.mjs）..." + docker exec -d "$WEB_CONTAINER_NAME" sh -c " + cd /data/httpd/ECShopX_web-frontend && \ + NITRO_HOST=0.0.0.0 NITRO_PORT=3000 HOST=0.0.0.0 PORT=3000 nohup node .output/server/index.mjs > /var/log/nuxt.log 2>&1 & + " || { + log_error "Nuxt 服务启动失败" + log_info "请检查日志: docker exec $WEB_CONTAINER_NAME tail -f /var/log/nuxt.log" + return 1 + } + + # 等待Nuxt服务启动 + log_info "等待 Nuxt 服务启动..." + local nuxt_ready=false + for i in {1..30}; do + if docker exec "$WEB_CONTAINER_NAME" sh -c "wget -q --spider http://127.0.0.1:3000 >/dev/null 2>&1 || wget -S -O /dev/null http://127.0.0.1:3000 2>&1 | grep -q 'HTTP/'" 2>/dev/null; then + nuxt_ready=true + break + fi + sleep 2 + if [ $((i % 5)) -eq 0 ]; then + printf "\r${CYAN}[INFO]${NC} 等待 Nuxt 服务启动... ($i/30)" + fi + done + + if [ "$nuxt_ready" = true ]; then + printf "\r${GREEN}[SUCCESS]${NC} Nuxt 服务已启动并监听3000端口" + printf "%50s" "" + echo "" + if [ "$INSTALLED_VSHOP" = true ]; then + log_info "H5前端访问地址: $H5_URL" + fi + if [ "$INSTALLED_PC" = true ]; then + log_info "PC前端访问地址: $PC_URL" + fi + else + printf "\r${YELLOW}[WARNING]${NC} Nuxt 服务启动超时，但可能仍在启动中" + printf "%50s" "" + echo "" + log_info "请检查日志: docker exec $WEB_CONTAINER_NAME tail -f /var/log/nuxt.log" + if [ "$INSTALLED_VSHOP" = true ]; then + log_info "H5前端访问地址: $H5_URL" + fi + if [ "$INSTALLED_PC" = true ]; then + log_info "PC前端访问地址: $PC_URL" + fi + fi + + # 重新加载nginx配置以确保8082端口配置生效 + log_info "重新加载 Nginx 配置..." + docker exec "$CONTAINER_NAME" sh -c "nginx -s reload" 2>/dev/null || { + log_warning "Nginx 配置重载失败，可能需要重启容器" + } + else + log_error "ECShopX_web-frontend 编译输出不完整" + return 1 + fi +} + +# =========================================== +# 编译 ECShopX_mobile-frontend +# =========================================== + +build_vshop() { + if [ "$SKIP_VSHOP" = true ]; then + log_info "跳过 ECShopX_mobile-frontend 编译（--skip-vshop）" + return 0 + fi + + VSHOP_DIR="$PARENT_DIR/ECShopX_mobile-frontend" + + if [ ! -d "$VSHOP_DIR" ]; then + log_warning "ECShopX_mobile-frontend 目录不存在，跳过编译" + return 0 + fi + + log_info "==========================================" + log_info "开始编译 ECShopX_mobile-frontend（H5前端）..." + log_info "==========================================" + + if [ ! -f "$VSHOP_DIR/package.json" ]; then + log_error "ECShopX_mobile-frontend/package.json 不存在" + return 1 + fi + + # 检查是否已有编译产物 + if [ -d "$VSHOP_DIR/dist" ]; then + log_info "检测到已有编译产物，跳过编译" + log_info "如需重新编译，请删除 ECShopX_mobile-frontend/dist 目录" + return 0 + fi + + # 检查容器内目录是否存在并确保正确挂载 + log_info "检查容器内目录挂载状态..." + if ! check_container_directory "/data/httpd/ECShopX_mobile-frontend" "$VSHOP_DIR" "ECShopX_mobile-frontend"; then + return 1 + fi + + # 从 ECShopX 配置文件读取业务模式 + read_product_model_from_env + + if [ "$SELECTED_PLATFORM" = "standard" ]; then + BUILD_MODE_NAME="B2C" + else + BUILD_MODE_NAME="BBC (B2B2C)" + fi + log_info "使用业务模式: $BUILD_MODE_NAME" + + # 确认默认语言（如果还未选择） + if [ -z "$SELECTED_LANG" ]; then + echo "" + log_info "请选择默认语言：" + log_info " 1) 中文 (zhcn)" + log_info " 2) 英文 (en)" + echo "" + while true; do + read -r -p "请输入选项 (1 或 2，默认: 1): " LANG_CHOICE < /dev/tty + LANG_CHOICE=${LANG_CHOICE:-1} + if [ "$LANG_CHOICE" = "1" ] || [ "$LANG_CHOICE" = "zhcn" ] || [ "$LANG_CHOICE" = "zh" ]; then + SELECTED_LANG="zhcn" + break + elif [ "$LANG_CHOICE" = "2" ] || [ "$LANG_CHOICE" = "en" ] || [ "$LANG_CHOICE" = "english" ]; then + SELECTED_LANG="en" + break + else + log_error "无效的选项，请输入 1 或 2" + fi + done + echo "" + log_info "已选择默认语言: $SELECTED_LANG" + echo "" + else + log_info "复用已选择的默认语言: $SELECTED_LANG" + fi + + # 配置前端项目的 .env 文件 + log_info "配置 ECShopX_mobile-frontend 的 .env 文件..." + configure_frontend_env "$VSHOP_DIR" "ECShopX_mobile-frontend" "$MOBILE_API_URL" "$SELECTED_PLATFORM" "$SELECTED_LANG" + + log_info "安装 npm 依赖..." + # 使用绝对路径并先验证目录存在 + docker exec "$CONTAINER_NAME" sh -c " + if [ ! -d /data/httpd/ECShopX_mobile-frontend ]; then + echo '错误: 目录不存在' + exit 1 + fi + cd /data/httpd/ECShopX_mobile-frontend || exit 1 + npm install --legacy-peer-deps + " > /tmp/npm_vshop_output.log 2>&1 & + local npm_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $npm_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 安装 ECShopX_mobile-frontend npm 依赖中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $npm_pid + local npm_exit=$? + + if [ $npm_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_mobile-frontend npm install 失败" + printf "%50s" "" + echo "" + cat /tmp/npm_vshop_output.log 2>/dev/null | tail -20 + log_info "请检查容器内目录状态: docker exec $CONTAINER_NAME ls -la /data/httpd/ECShopX_mobile-frontend" + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_mobile-frontend npm 依赖安装完成" + printf "%50s" "" + echo "" + fi + + log_info "执行编译（npm run build:h5）..." + docker exec "$CONTAINER_NAME" sh -c "cd /data/httpd/ECShopX_mobile-frontend && npm run build:h5" > /tmp/build_vshop_output.log 2>&1 & + local build_pid=$! + + # 显示进度动画 + local spinstr='|/-\' + while kill -0 $build_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 编译 ECShopX_mobile-frontend 中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $build_pid + local build_exit=$? + + if [ $build_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} ECShopX_mobile-frontend 编译失败" + printf "%50s" "" + echo "" + cat /tmp/build_vshop_output.log 2>/dev/null | tail -20 + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} ECShopX_mobile-frontend 编译完成" + printf "%50s" "" + echo "" + fi + + if docker exec "$CONTAINER_NAME" sh -c "[ -d /data/httpd/ECShopX_mobile-frontend/dist ]"; then + log_success "ECShopX_mobile-frontend 编译成功" + return 0 + else + log_error "ECShopX_mobile-frontend 编译输出目录不存在" + return 1 + fi +} + +# =========================================== +# 导入 Demo 数据 +# =========================================== + +import_demo_data() { + # 如果全局变量为空，尝试从 ECShopX 配置文件读取 + read_product_model_from_env + + if [ -z "$SELECTED_PLATFORM" ]; then + log_info "未选择业务模式，跳过 Demo 数据导入" + return 0 + fi + + local demo_dir="/data/httpd/ECShopX/docker-dev/demo" + + # 检查数据库中 items 表是否已有数据 + local item_count + item_count=$(docker exec "$CONTAINER_NAME" sh -c \ + "mysql -u$MYSQL_USER -p'$MYSQL_PASSWORD' -h127.0.0.1 $MYSQL_DATABASE -sN -e 'SELECT COUNT(*) FROM items;'" 2>/dev/null) + + if [ -n "$item_count" ] && [ "$item_count" -gt 0 ] 2>/dev/null; then + log_info "数据库中已存在商品数据（items 表有 ${item_count} 条记录），跳过 Demo 数据导入" + return 0 + fi + + local sql_file="" + + if [ "$SELECTED_PLATFORM" = "platform" ]; then + # BBC 模式，只有一个 bbc.sql + sql_file="bbc.sql" + echo "" + echo -n "是否导入 BBC Demo 数据？ [Y/n]: " + read -r import_answer < /dev/tty + if [ -n "$import_answer" ] && [ "$import_answer" != "Y" ] && [ "$import_answer" != "y" ] && [ "$import_answer" != "yes" ] && [ "$import_answer" != "YES" ]; then + log_info "跳过 Demo 数据导入" + return 0 + fi + elif [ "$SELECTED_PLATFORM" = "standard" ]; then + # B2C 模式，让用户选择行业 + echo "" + log_info "请选择要导入的 B2C Demo 数据（行业）：" + log_info " 1) 美妆" + log_info " 2) 运动" + log_info " 3) 包袋" + log_info " 0) 跳过，不导入" + echo "" + while true; do + read -r -p "请输入选项 (0-3，默认: 0): " DEMO_CHOICE < /dev/tty + DEMO_CHOICE=${DEMO_CHOICE:-0} + case "$DEMO_CHOICE" in + 0) + log_info "跳过 Demo 数据导入" + return 0 + ;; + 1) + sql_file="bc_beauty.sql" + break + ;; + 2) + sql_file="b2c_sports.sql" + break + ;; + 3) + sql_file="b2c_bags.sql" + break + ;; + *) + log_error "无效的选项，请输入 0-3" + ;; + esac + done + fi + + if [ -z "$sql_file" ]; then + return 0 + fi + + # 检查容器内 SQL 文件是否存在 + if ! docker exec "$CONTAINER_NAME" sh -c "test -f '$demo_dir/$sql_file'" 2>/dev/null; then + log_error "Demo 数据文件不存在: $demo_dir/$sql_file" + return 1 + fi + + log_info "正在导入 Demo 数据: $sql_file ..." + docker exec "$CONTAINER_NAME" sh -c \ + "mysql -u$MYSQL_USER -p'$MYSQL_PASSWORD' -h127.0.0.1 $MYSQL_DATABASE < '$demo_dir/$sql_file'" > /tmp/demo_import.log 2>&1 & + local import_pid=$! + + local spinstr='|/-\' + while kill -0 $import_pid 2>/dev/null; do + local temp=${spinstr#?} + printf "\r${CYAN}[INFO]${NC} 导入 Demo 数据中 ${spinstr:0:1}" + spinstr=$temp${spinstr%"$temp"} + sleep 0.2 + done + wait $import_pid + local import_exit=$? + + if [ $import_exit -ne 0 ]; then + printf "\r${RED}[ERROR]${NC} Demo 数据导入失败" + printf "%50s" "" + echo "" + cat /tmp/demo_import.log 2>/dev/null | tail -20 + return 1 + else + printf "\r${GREEN}[SUCCESS]${NC} Demo 数据导入完成（$sql_file）" + printf "%50s" "" + echo "" + fi +} + + +# =========================================== +# 开源安装统计上报（可选） +# =========================================== + +# 计算 MD5（大写十六进制），入参为原始字符串 +open_source_stat_md5_upper() { + local data="$1" + if command -v md5sum &>/dev/null; then + printf '%s' "$data" | md5sum | awk '{print toupper($1)}' + elif command -v md5 &>/dev/null; then + printf '%s' "$data" | md5 -q | tr '[:lower:]' '[:upper:]' + else + echo "" + fi +} + +# 按文档：除 sign 外键名升序，拼接 k + serialize(v)，MD5(secret + 拼接 + secret) 大写 +open_source_stat_sign() { + local secret="$1" + local product="$2" + local instance_id="$3" + local version="$4" + local timestamp="$5" + local s="instance_id${instance_id}product${product}timestamp${timestamp}version${version}" + open_source_stat_md5_upper "${secret}${s}${secret}" +} + +escape_json_string() { + local s="$1" + s="${s//\\/\\\\}" + s="${s//\"/\\\"}" + printf '%s' "$s" +} + +# 从 ECShopX 项目根目录 composer.json 读取 "version" 字段（用于开源安装统计） +get_ecshopx_version_from_composer() { + local f="${PROJECT_ROOT}/composer.json" + local v="" + [ -r "$f" ] || { + echo "0.0.0" + return 0 + } + if command -v php &>/dev/null; then + v=$(php -r '$j=json_decode(file_get_contents($argv[1]),true);echo isset($j["version"])?(string)$j["version"]:"";' "$f" 2>/dev/null || true) + fi + if [ -z "$v" ]; then + v=$(sed -n '1,40s/^[[:space:]]*"version"[[:space:]]*:[[:space:]]*"\([^"]*\)".*/\1/p' "$f" | head -1) + fi + [ -n "$v" ] || v="0.0.0" + echo "$v" +} + +get_open_source_instance_id() { + local mac="" + if [ "${OS:-}" = "macos" ]; then + mac=$(ifconfig 2>/dev/null | awk '/ether/ {print tolower($2); exit}' || true) + elif [ "${OS:-}" = "linux" ]; then + local f + for f in /sys/class/net/*/address; do + [ ! -f "$f" ] && continue + case "$f" in + */lo/address) continue ;; + esac + mac=$(tr '[:upper:]' '[:lower:]' < "$f" || true) + [ -n "$mac" ] && [ "$mac" != "00:00:00:00:00:00" ] && break + done + fi + if [ -z "$mac" ]; then + mac=$(hostname 2>/dev/null || echo "unknown") + fi + echo "${mac:0:64}" +} + +report_open_source_install_stat() { + local gateway="https://gwnextapi.shopex.cn" + local secret="aF3dG6hJ1kL9zXcV4bN2mQ" + ([ -z "$gateway" ] || [ -z "$secret" ]) && return 0 + command -v curl &>/dev/null || return 0 + + local product="echopx" + local instance_id + instance_id=$(get_open_source_instance_id) + local version + version=$(get_ecshopx_version_from_composer) + local timestamp + timestamp=$(date +%s) + local sign + sign=$(open_source_stat_sign "$secret" "$product" "$instance_id" "$version" "$timestamp") + [ -z "$sign" ] && return 0 + + local base="${gateway%/}" + local url="${base}/usercenter/open_source/stat/report" + local inst_esc ver_esc + inst_esc=$(escape_json_string "$instance_id") + ver_esc=$(escape_json_string "$version") + + local body + body=$(printf '{"product":"%s","instance_id":"%s","version":"%s","timestamp":%s,"sign":"%s"}' \ + "$product" "$inst_esc" "$ver_esc" "$timestamp" "$sign") + + curl -sS --max-time 15 -o /dev/null -X POST "$url" \ + -H 'Content-Type: application/json' \ + -d "$body" 2>/dev/null || true + return 0 +} + +# =========================================== +# 显示完成信息 +# =========================================== + +show_success_info() { + # 计算执行时间 + END_TIME=$(date +%s) + DURATION=$((END_TIME - START_TIME)) + MINUTES=$((DURATION / 60)) + SECONDS=$((DURATION % 60)) + + echo "" + log_success "==========================================" + log_success "恭喜你，安装成功" + log_success "温馨提示：移动商城、PC商城前端显示空白，并非系统问题，需前往管理后台配置模板数据。" + + # 根据安装的项目显示温馨提示 + if [ "$INSTALLED_VSHOP" = true ] || [ "$INSTALLED_PC" = true ]; then + local tip_msg="温馨提示：" + if [ "$INSTALLED_VSHOP" = true ] && [ "$INSTALLED_PC" = true ]; then + tip_msg="${tip_msg}移动商城、PC商城前端显示空白，并非系统问题，需前往管理后台配置模板数据。" + elif [ "$INSTALLED_VSHOP" = true ]; then + tip_msg="${tip_msg}移动商城前端显示空白，并非系统问题，需前往管理后台配置模板数据。" + elif [ "$INSTALLED_PC" = true ]; then + tip_msg="${tip_msg}PC商城前端显示空白，并非系统问题，需前往管理后台配置模板数据。" + fi + log_success "$tip_msg" + fi + + log_success "==========================================" + echo "" + log_info "服务信息：" + + if [ "$INSTALLED_ADMIN" = true ]; then + log_info " 管理后台: $ADMIN_URL" + fi + + if [ "$INSTALLED_VSHOP" = true ]; then + log_info " H5前端: $H5_URL" + fi + + if [ "$INSTALLED_PC" = true ]; then + log_info " PC前端: $PC_URL" + fi + + log_info " API 接口: $API_BASE_URL" + log_info " MySQL: localhost:3306 (用户: $MYSQL_USER, 密码: $MYSQL_PASSWORD)" + log_info " Redis: localhost:6379 (密码: $REDIS_PASSWORD)" + echo "" + + # 检查微信小程序编译产物（仅在安装了移动商城时显示） + if [ "$INSTALLED_VSHOP" = true ]; then + VSHOP_DIR="$PARENT_DIR/ECShopX_mobile-frontend" + if [ -d "$VSHOP_DIR/dist" ]; then + log_info "微信小程序：" + log_info " 微信开发者工具打开目录: $VSHOP_DIR/dist" + echo "" + fi + fi + log_info "常用命令：" + log_info " 查看日志: $DOCKER_COMPOSE_CMD -f $DOCKER_COMPOSE_FILE logs -f" + log_info " 主服务状态: docker exec $CONTAINER_NAME supervisorctl status" + log_info " 进入主容器: docker exec -it $CONTAINER_NAME sh" + log_info " 进入Web容器: docker exec -it $WEB_CONTAINER_NAME sh" + log_info " Web前端日志: docker exec $WEB_CONTAINER_NAME tail -f /var/log/nuxt.log" + log_info " 停止服务: $DOCKER_COMPOSE_CMD -f $DOCKER_COMPOSE_FILE down" + log_info " 重启服务: $DOCKER_COMPOSE_CMD -f $DOCKER_COMPOSE_FILE restart" + log_info " 重新构建: $0 --rebuild" + echo "" + log_info "执行时间: ${MINUTES}分${SECONDS}秒" + report_open_source_install_stat + log_success "==========================================" +} + +# =========================================== +# 主函数 +# =========================================== + +main() { + # 解析命令行参数 + parse_args "$@" + + echo "==========================================" + echo " ECShopX 开发环境设置 (Docker)" + echo " 支持: ECShopX / ECShopX_admin-frontend / ECShopX_mobile-frontend / ECShopX_web-frontend" + echo "==========================================" + echo "" + + detect_os + check_docker + configure_public_urls + + # 检查并克隆前端项目（在启动容器之前） + check_and_clone_frontend + + # 检查容器状态 + if check_container_status; then + run_docker + fi + + # 配置 PHP 应用 + configure_env + configure_application + configure_cron_and_supervisor_queues + + # 编译前端项目 + build_pc || log_warning "PC商城（ECShopX_web-frontend）编译未完成" + build_admin || log_warning "管理后台（ECShopX_admin-frontend）编译未完成" + build_vshop || log_warning "移动商城（ECShopX_mobile-frontend）编译未完成" + + # 导入 Demo 数据 + import_demo_data || log_warning "Demo 数据导入未完成" + + # Show success info + show_success_info +} + +# 执行主函数 +main "$@"