Justin Clark-Casey (justincc)
2f94165dcc
Add lsl arg syntax checking for control event
2013-12-21 01:00:50 +00:00
Justin Clark-Casey (justincc)
f1cd813a29
refactor: rename internal lsl parser VectorDeclaration -> VecDeclaration for consistency
2013-12-21 00:49:01 +00:00
Justin Clark-Casey (justincc)
871ac5b16c
Add arg checking for at_target lsl event
2013-12-21 00:46:34 +00:00
Justin Clark-Casey (justincc)
a5e4780547
Add lsl event arg checking for at_rot_target
2013-12-21 00:37:56 +00:00
Justin Clark-Casey (justincc)
b757ab2586
Add lsl event argument checking for attach and on_rez
2013-12-21 00:08:36 +00:00
Justin Clark-Casey (justincc)
51da52f904
Extend TestLlGetNotecardLine() regression test to contain chars that are two bytes in utf8
2013-12-14 02:48:29 +00:00
Justin Clark-Casey (justincc)
a64377149d
Add parameter checking for land_collision, land_collision_start and land_collision_end lsl events
...
Wrong number of parmeters now generates syntax error on compile, as seen on LL grid
2013-11-29 00:44:53 +00:00
Justin Clark-Casey (justincc)
f94d07f2e2
Add regression test to check that specifying a non-existent event raise a syntax error
...
This was the case before any of the recent changes
2013-11-16 03:02:57 +00:00
Justin Clark-Casey (justincc)
79c1ed8cb9
Add syntax checking for no_sensor() no-arg event
2013-11-16 03:00:03 +00:00
Justin Clark-Casey (justincc)
ec4d96acc9
refactor common code out of no argument LSL event regression tests
2013-11-16 02:58:06 +00:00
Justin Clark-Casey (justincc)
edd7e19463
If anything other than a single integer is specified for events that only take a single integer, generate a syntax error on LSL script compile rather than an exception later on.
...
This applies to events changed, collision, collision_start, collision_end, on_rez, run_time_permissions, sensor, touch, touch_start, touch_end
2013-11-16 02:50:14 +00:00
Justin Clark-Casey (justincc)
62006baaef
Make state_exit, moving_end, moving_start, not_at_rot_target, not_at_target and timer LSL events generate a syntax error if inappropriately given arguments.
...
This matches behaviour seen on the LL grid and a previous change for state_entry.
These are all the events which should take no arguments
2013-11-16 01:30:23 +00:00
Justin Clark-Casey (justincc)
d728c1beb2
refactor LSL_EventTests.TestStateEntryEvent into single method to test compile
2013-11-16 01:25:25 +00:00
Justin Clark-Casey (justincc)
7cab41f422
refactor: replace verbose checks with String.IsNullOrEmpty where applicable.
...
Thanks to Kira for this patch from http://opensimulator.org/mantis/view.php?id=6845
2013-11-15 21:45:08 +00:00
Justin Clark-Casey (justincc)
fd24147afa
Add initial test for checking that specifying a parameter in LSL state_entry() generates a syntax error.
...
Same for other events to follow at a later date.
2013-11-09 00:36:05 +00:00
dahlia
0b4577d5b0
add support for particle glow LSL functions
2013-11-05 23:48:44 -08:00
dahlia
709814c194
add support for particle blending LSL functions
2013-11-05 23:38:43 -08:00
Justin Clark-Casey (justincc)
2b069a3b1e
If the LSL state_entry() event definition contains any parameters, then generate syntax error as seen on the LL grid
...
This is done through the parser and so generates the same syntax error message if any parameters are wrongly specified for this event.
We were already enforcing event names in the parser.
This is only for state_entry so far as an initial test of the approach - appears to work correctly.
2013-11-02 00:39:12 +00:00
dahlia
cc73ef4eb9
add new particle system blending rule enumerations
2013-10-31 17:49:01 -07:00
dahlia
eb52d346c0
add new LSL constants associated with new "ribbon", "glow", and "blend" particle system functionality. Note that this does *not* complete required server side changes for implementing the new particle system
2013-10-31 16:13:03 -07:00
Kevin Cozens
84a149ecbf
Call ScriptSleep() instead of llSleep() in routine for llEmail.
...
Signed-off-by: teravus <teravus@gmail.com >
2013-10-18 14:30:05 -05:00
Oren Hurvitz
d0c1780839
Fixed rezzing coalesced objects from a prim's inventory
...
Previously only the first object in the Coalesced Object was rezzed. Now all the objects are rezzed.
2013-10-15 23:59:16 +01:00
Justin Clark-Casey (justincc)
42bdf44658
Bump OPenSimulator version and assembly versions up to 0.8.0 Dev
2013-10-04 23:33:47 +01:00
Justin Clark-Casey (justincc)
b16bc7b01c
refactor: rename Scene.IncomingCloseAgent() to CloseAgent() in order to make it clear that all non-clientstack callers should be using this rather than RemoveClient() in order to step through the ScenePresence state machine properly.
...
Adds IScene.CloseAgent() to replace RemoveClient()
2013-09-27 19:14:21 +01:00
Justin Clark-Casey (justincc)
f99dae03cb
Fix bug where using PRIM_LINK_TARGET with only two remaining list items (e.g. link number then PRIM_ROTATION) would not return the parameter
...
Extended regression test for this case
2013-09-16 23:00:40 +01:00
Justin Clark-Casey (justincc)
60cf42cb8d
Make llGetLinkPrimitiveParams() abort and return existing list of params when it encounters an invalid link number, rather than throwing an exception
...
Addresses http://opensimulator.org/mantis/view.php?id=6768
Thanks to talun for the patch on that commit - in the end I took a different approach that also deals with invalid PRIM_LINK_TARGET
However, not yet generating the same warning on invalid PRIM_LINK_TARGET as seen on LL grid
This commit also adds regression tests for some cases of llGetLinkPrimitiveParams()
2013-09-16 22:56:08 +01:00
Talun
07d6a0385f
6762: llList2Key fails to convert a string in a list to a key
...
llGetPrimitiveParams changed to return the sculpty key as an LSL_String so
that type checking in llList2Key will work
2013-09-12 23:23:52 +01:00
Robert Adams
a90351cd2c
Remove exception when printing error for failure removing script state.
2013-08-13 11:49:09 -07:00
Robert Adams
87ee0c395e
Fix problem with modInvoke defined integer constants being build into
...
scripts as boxed integers rather than proper reference to a new LSLInteger.
This fixes an exception when using a registered integer constant in
a script.
2013-08-02 09:44:01 -07:00
Justin Clark-Casey (justincc)
a08f01fa83
Fix NPC regression test failures.
...
These were genuine failures caused by ScenePresence.CompleteMovement() waiting for an UpdateAgent from NPC introduction that would never come.
Instead, we do not wait if the agent is an NPC.
2013-07-26 18:43:15 +01:00
Justin Clark-Casey (justincc)
3d118fb580
In co-op termination, extend EventWaitHandle to give this an indefinite lifetime in order to avoid a later RemotingException if scripts are being loaded into their own domains.
...
This is necessary because XEngineScriptBase now retains a reference to an EventWaitHandle when co-op termination is active.
Aims to address http://opensimulator.org/mantis/view.php?id=6634
2013-07-13 00:02:54 +01:00
Justin Clark-Casey (justincc)
cec8e6d0f7
If a sensor is in an attachment, avoid throwing an exception if the attachee is removed from the scene before we try to retrieve them.
2013-07-09 23:52:47 +01:00
Robert Adams
d838f15d97
Add implementations for llSetVelocity and llSetAngularVelocity.
2013-07-06 09:53:30 -07:00
dahlia
694c4bcbb6
correct method doc for llRot2Axis()
2013-06-14 20:00:20 -07:00
Justin Clark-Casey (justincc)
da3724a904
minor: remove mono compiler warnings from LSL_Api, properly format method doc for llRot2Axis()
2013-06-15 00:11:36 +01:00
Talun
f074739e33
Mantis 6280: llSetContentType(). An implementation.
...
An implimentation of llSetContentType including all of the new
constants added since the mantis was raised.
2013-06-15 00:06:03 +01:00
Talun
fc89bde044
Mantis 6108: ossetprimitiveparams temporary/phantom problem
...
Corrected to ensure that the target prim is updated by
osSetPrimitiveParams when setting PRIM_TEMP_ON_REZ and/or PRIM_PHANTOM
instead of the prim that the script is in.
2013-06-15 00:00:00 +01:00
dahlia
ed950e6c74
Adjust output of llRot2Axis and llRot2Angle to match domains SL(tm) uses. Addresses Mantis #0006671
2013-06-11 00:29:40 -07:00
dahlia
ba84074468
LSL_Rotation.Normalize() now returns 0,0,0,1 for x,y,z,s when normalization fails
2013-06-10 17:54:14 -07:00
dahlia
9d9b9d4938
llRot2Angle now checks absolute value of s rotation component before normalizing
2013-06-10 17:11:49 -07:00
dahlia
b242ead6df
llRot2Axis now checks absolute value of s rotation component before normalizing. Also removed some excessive division and cleaned up a bit
2013-06-10 17:10:04 -07:00
teravus
1c7fbb86c2
Check For NaN and Infinity in llRot2Axis/Angle Fixes mantis #6669
2013-06-10 18:47:08 -05:00
dahlia
a949556c4e
add a Normalize() method for LSL_Rotation
2013-06-10 16:42:49 -07:00
Talun
7de0912a97
Mantis 5346: llAxisAngle2Rot() should normalize before computing
...
Corrected to agree with
http://wiki.secondlife.com/wiki/Llaxisangle2rot#Deep_Notes
to normalise the vector before computing the quaternion
Signed-off-by: dahlia <dahlia@nomail>
2013-06-10 04:13:34 -07:00
Melanie
81ad9255b5
Hook up Keyframe motion to almost everything. Failing to cross a sim border
...
may yield unexpected results in some cases. No database persistence yet,
2013-06-06 03:03:05 +01:00
Justin Clark-Casey (justincc)
217c7d1140
Remove unnecessary m_scenes and m_scene from AsyncCommandManager.
...
These were private and the sole point of use (to know when to load config for the first time) can be done by looking at script engines instead.
2013-05-31 23:00:10 +01:00
Justin Clark-Casey (justincc)
921ad8704e
Lock areas of AsyncCommandManager where multiple threads could try to access/update the same static structures simultaneously.
...
This is possible where there is more than one scene (multiple copies of the same script engine) and/or more than one script engine being used.
These operations are not thread safe and could be leading to the exceptions/problems seen in http://opensimulator.org/mantis/view.php?id=6651
This also prevents a small race condition where more than one AsyncLSLCmdHandlerThread could be started.
2013-05-31 22:50:15 +01:00
Justin Clark-Casey (justincc)
00c1586ff8
refactor: Remove unused AsyncCommandManager.PleaseShutdown
2013-05-31 18:12:36 +01:00
Justin Clark-Casey (justincc)
46335b103e
If an exception occurs in the AsyncCommandManager loop, spit it out to log rather than silently swallowing it.
...
This might help diagnose the cause of http://opensimulator.org/mantis/view.php?id=6651 where sometimes scripts fail to start on region start.
2013-05-30 23:51:35 +01:00
Justin Clark-Casey (justincc)
7d38f4940c
Implement llSetSoundQueueing().
...
This is controlled by the viewer, not the server.
So as per http://wiki.secondlife.com/wiki/LlSetSoundQueueing , only two sounds can be queued per prim.
You probably need to use llPreloadSound() for best results
2013-05-22 20:01:57 +01:00
