Robert Adams
beeec1c467
varregion: elimination of Constants.RegionSize from all over OpenSimulator.
...
Routines in Util to compute region world coordinates from region coordinates
as well as the conversion to and from region handles. These routines have
replaced a lot of math scattered throughout the simulator.
Should be no functional changes.
2013-11-08 20:53:37 -08:00
Robert Adams
a7a837550e
varregion: Massive work to LandManagementModule and LandObject to
...
handle variable sized regions. Many changes for both the region and parcels.
Most of the constant "4" (for the 4x4 parcel units) have been replaced
with symbols and math.
2013-11-08 20:51:09 -08:00
Robert Adams
f7bd0da026
Merge branch 'master' into varregion
2013-11-06 06:32:11 -08:00
dahlia
0b4577d5b0
add support for particle glow LSL functions
2013-11-05 23:48:44 -08:00
dahlia
709814c194
add support for particle blending LSL functions
2013-11-05 23:38:43 -08:00
Robert Adams
a75ce7423c
Merge branch 'master' into varregion
2013-11-05 21:42:27 -08:00
Latif Khalifa
26fd29622d
Added sending (for now hard-coded) sim isze in SendMapBlockSplit()
2013-11-06 03:52:04 +01:00
Justin Clark-Casey (justincc)
8e1bf55e7b
Add IncomingPacketsResentCount clientstack statistics
...
This records how many packets were indicated to be resends by clients
Not 100% reliable since clients can lie about resends, but usually would indicate if clients are not receiving UDP acks at all or in a manner they consider timely.
2013-11-06 01:02:20 +00:00
Robert Adams
c931b16c1f
Merge branch 'master' into varregion
2013-11-04 22:12:57 -08:00
Robert Adams
f2810bf03a
varregion: add plumbing to pass region size from Scene down to the
...
physics engine.
Older physics engines will default to the legacy region size.
Update BulletSim to use the new region size information.
2013-11-04 22:10:54 -08:00
Robert Adams
cd1a23fc14
varregion: remove uses of region size constant. In particular, update scene
...
to check for border crossings based on the size of the region.
2013-11-04 22:09:52 -08:00
Robert Adams
9bf363e9be
varregion: send the proper terrain patch layer code for large terrain.
...
Code cleanups.
2013-11-03 08:14:51 -08:00
Justin Clark-Casey (justincc)
2b069a3b1e
If the LSL state_entry() event definition contains any parameters, then generate syntax error as seen on the LL grid
...
This is done through the parser and so generates the same syntax error message if any parameters are wrongly specified for this event.
We were already enforcing event names in the parser.
This is only for state_entry so far as an initial test of the approach - appears to work correctly.
2013-11-02 00:39:12 +00:00
Robert Adams
92c06a5d0b
varregion: fix lawn-mower terrain fill so it works for non-square regions.
...
Add some debugging logs on region creation to report region size.
2013-11-01 16:37:27 -07:00
dahlia
7faf286d00
add null check for jpeg2000 sculpt image decode failure. Note: the j2kDecodeCache folder should be cleared after updating to this revision so that sculpts containing alpha can be re-decoded and successfully meshed.
2013-11-01 13:45:09 -07:00
Robert Adams
ff5885ab23
varregion: push TerrainData implementation up and down the database storage stack.
...
Implement both LoadTerrain and StoreTerrain for all DBs.
Move all database blob serialization/deserialization into TerrainData.
2013-11-01 11:35:31 -07:00
dahlia
f4ded3af63
discard alpha in 4-plane sculpt textures before generating physics proxy mesh
2013-11-01 01:40:56 -07:00
dahlia
cc73ef4eb9
add new particle system blending rule enumerations
2013-10-31 17:49:01 -07:00
Justin Clark-Casey (justincc)
4c4a1cf715
Start counting resent packets in the places that I missed when the stat was first added a few commits ago
2013-10-31 23:59:22 +00:00
Justin Clark-Casey (justincc)
50794c9008
minor: remove mono compiler warnings in AvatarPickerSearchModule and UploadBakedTextureModule
2013-10-31 23:51:01 +00:00
Justin Clark-Casey (justincc)
3d5a7e9b19
Add OutgoingPacketsResentCount clientstack stat.
...
This allows one to monitor the total number of messages resent to clients over time.
A constantly increasing stat may indicate a general server network or overloading issue if a fairly high proportion of packets sent
A smaller constantly increasing stat may indicate a problem with a particular client-server connection, would need to check "show queues" in this case.
2013-10-31 23:45:52 +00:00
dahlia
eb52d346c0
add new LSL constants associated with new "ribbon", "glow", and "blend" particle system functionality. Note that this does *not* complete required server side changes for implementing the new particle system
2013-10-31 16:13:03 -07:00
Robert Adams
39777db8ef
varregion: fix problem of X/Y dimensions swapped and incorrect terrain
...
compression base computation.
Complete replacement of float[] for terrain heightmap with TerrainData instance.
2013-10-31 09:24:06 -07:00
Justin Clark-Casey (justincc)
fdd1c63c3c
Make "fcache status" command also display information on disk/mem cache hit rate that is currently only displayed if LogLevel >=1 in [AssetCache] config
2013-10-30 18:57:51 +00:00
Justin Clark-Casey (justincc)
28f36d8db5
Put fcache commands output to console, not log
2013-10-30 18:32:53 +00:00
Justin Clark-Casey (justincc)
26c2d9e627
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-28 23:48:43 +00:00
Justin Clark-Casey (justincc)
39de7614ec
Remove legacy sqlite lines added internally by OpenSimulator to the [Startup] section.
...
These are long unused but confusingly will be seen in the [Startup] section on a "config save".
2013-10-28 18:03:34 +00:00
Robert Adams
2be0347f50
Merge branch 'master' into varregion
2013-10-28 09:30:26 -07:00
Robert Adams
93d5d66fbd
BulletSim: update collision flags to make sure they fit in the shorts provided.
2013-10-26 21:20:19 -07:00
Justin Clark-Casey (justincc)
df76e52310
minor: Add commented out code for apparent passing of texture IDs in ObjectProperties UDP replies to viewer
...
Not yet shown that this is used or resolves a bug where not all textures appear on objects with an "XML with textures" upload from singularity 1.8.3
Proper texture entries are actually present and appear properly on relog, but not on select from viewer until at least one face texture is changed.
2013-10-24 23:00:02 +01:00
Justin Clark-Casey (justincc)
31989bd51e
Show texture ids for full object/part info console commmds
2013-10-24 21:29:57 +01:00
Justin Clark-Casey (justincc)
cccdfcb59e
Comment out LLUDPServer.BroadcastPacket() to reduce code complexity. Appears to be a never used method.
2013-10-24 00:37:49 +01:00
Justin Clark-Casey (justincc)
5d61c4039d
Only set the data present event if we actually queued an outoing packet (not if we sent immediately)
2013-10-24 00:33:14 +01:00
Robert Adams
511122834b
BulletSim: change collision flags for groundplane to not interact with static objects.
...
Reorder collision flag setting code for terrain to fit pattern used elsewhere.
2013-10-23 16:07:03 -07:00
Kevin Cozens
84a149ecbf
Call ScriptSleep() instead of llSleep() in routine for llEmail.
...
Signed-off-by: teravus <teravus@gmail.com >
2013-10-18 14:30:05 -05:00
Oren Hurvitz
0094971186
After finishing to edit an attachment, let other avatars see the changes. (The changes weren't visible before because updates to attachments aren't sent while the attachment is selected.)
2013-10-17 23:10:16 +01:00
Robert Adams
8937a2244d
Merge branch 'master' into varregion
2013-10-16 07:53:44 -07:00
Robert Adams
97bc5263de
varregion: move the compressed heighmap compression factor from
...
Constants into TerrainData.
Save compression factor with the terrain blob in the database.
2013-10-16 07:52:30 -07:00
Robert Adams
766a31431e
BulletSim: implement the SL bug where VEHICLE_HOVER_UP_ONLY disables
...
the vehicle buoyancy if the vehicle is above its hover height.
This is a known misfeature of this vehicle flag which has been accepted
since it would break too many implementations. The problem is noticed
when creating a jetski-like vehicle that jumps over sand bars. A boat
normally is configured with neutral buoyancy and hovering at water
height. When it jumps the sandbar, it needs to have gravity applied
to get back to water level.
2013-10-15 17:02:22 -07:00
Oren Hurvitz
d0c1780839
Fixed rezzing coalesced objects from a prim's inventory
...
Previously only the first object in the Coalesced Object was rezzed. Now all the objects are rezzed.
2013-10-15 23:59:16 +01:00
Kevin Cozens
5ca7395e17
Added support for attachments to group notices when using Flotsam groups.
2013-10-15 23:07:49 +01:00
Oren Hurvitz
f106ba87ca
Made terrain uploads thread-safe
2013-10-15 00:12:56 +01:00
Robert Adams
8b5e2f2cd2
BulletSim: Fix snap back from edge of region problem. Mantis 6794.
2013-10-11 13:29:43 -07:00
teravus
75fdd6054d
* Refactor
...
* Break out common BasicDOSProtector code into separate class.
2013-10-07 23:19:50 -05:00
teravus
f76cc6036e
* Added a Basic DOS protection container/base object for the most common HTTP Server handlers. XMLRPC Handler, GenericHttpHandler and <Various>StreamHandler
...
* Applied the XmlRpcBasicDOSProtector.cs to the login service as both an example, and good practice.
* Applied the BaseStreamHandlerBasicDOSProtector.cs to the friends service as an example of the DOS Protector on StreamHandlers
* Added CircularBuffer, used for CPU and Memory friendly rate monitoring.
* DosProtector has 2 states, 1. Just Check for blocked users and check general velocity, 2. Track velocity per user, It only jumps to 2 if it's getting a lot of requests, and state 1 is about as resource friendly as if it wasn't even there.
2013-10-07 21:35:55 -05:00
Robert Adams
86bf79aa2b
Merge branch 'master' into varregion
2013-10-07 13:58:17 -07:00
Robert Adams
7416809077
varregion: plug in TerrainData class and modify TerrainModule and LLClientView to use same. This passes a terrain info class around rather than passing a one dimensional array thus allowing variable regions. Update the database storage for variable region sizes. This should be downward compatible (same format for 256x256 regions).
2013-10-07 13:57:40 -07:00
Robert Adams
25ae59b9eb
varregion: remove scattered use of Constants.RegionSize by having routines reference RegionInfo.RegionWorldLoc?.
2013-10-07 13:57:30 -07:00
Robert Adams
9b150194f6
varregion: add new TerrainData and TerrainCompressor routines. TerrainCompressor needed to replace the one in libopenmetaverse that doesn't know about the larger terrain packets.
2013-10-07 13:57:16 -07:00
Diva Canto
083eb7679b
Added SimulatorFeatures/OpenSimExtras: say-range, whisper-range, shout-range, at the request of Singularity dev Liru-Dargon
2013-10-04 17:32:17 -07:00
